Menu operation (continued)
4. SIGNAL menu
opt. |
| |
SIGNAL | AV MEMORY 1 | |
HORIZ. POSITION | 0 | |
VERT. POSITION | 0 | |
FINE SYNC. | 0 | |
TRACKING | 0 | |
COMPUTER | AUTO | |
RRGGBB INPUT | ||
| ||
OVER SCAN | 100% | |
HOLD | ON | |
USER | OK |
5. USER menu
USER
| CLAMP | 1 |
| POSITION |
|
|
|
|
| CLAMP WIDTH | 1 |
|
|
|
|
|
|
| VERT. SYNC | AUTO |
|
|
|
| LPF | OFF |
|
|
|
|
|
|
| SHUTTER(U) | 0 |
|
|
|
| SHUTTER(L) | 0 |
|
|
|
| SHUTTER(LS) | 0 |
|
|
|
| SHUTTER(RS) | 0 |
|
|
|
4. SIGNAL menu |
|
|
|
|
ITEM | SETTING | FUNCTION | ||
HORIZ. POSITION | 0 - 999 |
|
| Use to adjust the horizontal position of the projected image. |
VERT. POSITION | 0 - 999 |
|
| Use to adjust the vertical position of the projected image. |
FINE SYNC. | 0 - 31 |
|
| Use to eliminate flickering or blur, if it appears, while viewing the projected |
|
|
|
| image. |
TRACKING | 0 - 9999 |
|
| Use to eliminate vertical wide stripes, if it appears, while viewing the projected |
|
|
|
| image. |
COMPUTER INPUT | AUTO | The proper setting is automatically selected. | ||
| RGB | Select this option when connecting the projector to high definition video | ||
|
|
|
| equipment having R, G, and B output terminals. |
| YCBCR / YPBPR | Select this option when connecting the projector to a DVD player or other | ||
|
|
|
| device having Y, CB, and CR (or Y, PB, and PR) component video output |
|
|
|
| terminals. |
OVER SCAN | 100 - 90% |
| Use to adjust the display area of the projected image when playing LD and | |
|
|
|
| DVD discs. |
HOLD | OFF / ON |
|
| Use to adjust the image when flagging occurs near the top of the screen. |
| ||||
•Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.
•When you change the horizontal or vertical position to a large extent, noise may appear.
•The adjustable range of the vertical position varies depending on the type of the input signal. Though the image may stay in the same position even when the setting value is changed, such symptom is not a malfunction.
•If you increase the OVER SCAN setting when viewing video signals, noise may appear on the screen. In this case, decrease the OVER SCAN setting.
5. USER menu |
|
|
ITEM | SETTING | FUNCTION |
CLAMP POSITION | 1 - 255 | Use to correct solid white or solid black in the projected image. |
CLAMP WIDTH | 1 - 63 | Use to correct solid black in the projected image. |
VERT.SYNC | AUTO / OFF | Use to adjust the image when its motion doesn’t run smoothly. Select AUTO for |
|
| normal use. |
LPF | ON / OFF | Use to select whether or not to enable the LPF. |
SHUTTER(U) | 0 - 32 | Use to display the black bar on the top part of the image. |
SHUTTER(L) | 0 - 32 | Use to display the black bar on the bottom part of the image. |
SHUTTER(LS) | 0 - 95 | Use to display the black bar on the left half of the image. |
SHUTTER(RS) | 0 - 95 | Use to display the black bar on the right half of the image. |