Installation to Threaded Rod
(Not evaluated by UL - Professional installation only)
4 | Thread two 3/8-16 hex thin nylon-insert locknuts (not included) on two 3/8-16 threaded rods (not included) to the |
desired height of projector mount assembly. Attach projector mount assembly (A) to the two 3/8-16 threaded rods |
using two 3/8-16 hex thin nylon-insert locknuts as shown in figure 4.1 or figure 4.2.
3/8 -16 THREADED ROD
(NOT INCLUDED)
3/8 -16 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)
A
FRONT OF
MOUNT
3/8 -16 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)
fig. 4.1
3/8 -16 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)
3/8 -16 THREADED ROD
(NOT INCLUDED)
3/8 -16 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)
A
FRONT OF
MOUNT
fig. 4.2
7 of 12 | ISSUED: 09-19-05 SHEET #: 055-9441-5 10-31-08 |
Visit the Peerless Web Site at www.peerlessmounts.com | For customer care call 1-800-729-0307 or 708-865-8870. |
