Projector Alignment
To adjust yaw (swivel) for wood stud, concrete ceiling, and threaded rod mounting applications: Loosen wood screws (F), or locknuts for threaded rods, until projector mount can be rotated. Rotate mount to desired position and retighten screws or locknuts.
To adjust yaw (swivel) for extension column applications: Loosen screw on projector mount assembly (A) indicated below until projector mount can be rotated. Rotate mount to desired position and retighten screw.
To adjust pitch (forward and backward tilt): Loosen two screws on projector mount assembly (A) indicated below. Tilt mount to desired position and retighten screws.
To adjust roll (side to side tilt): Loosen two screws on projector mount assembly (A) indicated below. Tilt mount to desired position and retighten screws.
| A | SCREW FOR SWIVEL STOP |
|
| |
SCREWS FOR PITCH |
| SCREWS FOR ROLL |
| ADJUSTMENT | |
ADJUSTMENT |
| |
|
|
BACK OF MOUNT
11 of 11 | ISSUED: |
Visit the InFocus Web Site at www.infocus.com