Disengage connection block from projector mount assembly (A) by unscrewing captive screw and sliding out connection block as shown.
A
CONNECTIONBLOCK
CAPTIVESCREW
Installation To Wood Joist Finished Ceilings, Exposed Wood Joists, or Wood Beam Ceilings
Drill two 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64 mm). Attach ceiling plate (Q) with two #14 x 2.5" (6 mm x 65 mm) wood screws (F) as shown using 3/8" (10 mm) socket wrench. Tighten wood screws (F) so ceiling plate (Q) is firmly attached.
WOOD
JOIST
CEILING
WARNING
•Tighten wood screws so that ceiling plate is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power.
•Never tighten in excess of 80 in • lb (9 N.M.).
•Make sure that mounting screws are anchored into the center of the joist. The use of an "edge to edge" stud finder is highly recommended.
Skip to step 7.
Q
F
F
WOOD |
|
JOIST | For optional Cord Management, |
| |
CEILING | install two spacers (L) between ceiling |
| plate (Q) and ceiling. |
L | L |
| |
| Q |
F | F |
|
3 of 11 | ISSUED: |
Visit the InFocus Web Site at www.infocus.com