Brother PT-2030, PT2030AD appendix ZBar Code Settingsz, Entering Bar Code Data

EDITING A LABEL

	zBar Code Settingsz
Attribute	Value
Protocol	CODE39, CODE128, EAN-8, EAN-13,
	GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF),
	CODABAR
Width	Small
	Large
Under#	On
(characters printed
	Off
below bar code)
C.Digit	Off
	On
(check digit)	(only available for the CODE39, I-2/5
	and CODABAR protocols)

Entering Bar Code Data

1

Press the Bar Code key.

The Bar Code Input screen is displayed.

Up to five bar codes can be entered on a label.

2

Type in the bar code data.

Special characters can be entered in the bar code when using the CODE39, CODABAR, CODE128 or GS1-128 (UCC/EAN-128) protocols. When not using special characters, go to step 5.

3

Press the Symbol key.

A list of characters available for the current protocol is displayed.

4

Select a character using the or key, then press the OK or Enter key to insert the character in the bar code data.

5

Press the OK or Enter key to insert the bar code in the label.

The bar code is displayed on the text entry screen.

38

Creating a Bar Code Label