Airlink101 AR504 manual

Page 4

Step 5 Type ipconfig/renew and press Enter. You should get an IP address of 192.168.1.x (where x is a number between 2 - 254). Proceed to Section 3, Configure the Router. If you don’t get an IP address, reset the router by holding in the reset button at the back of the router for 10 seconds while it is ON and try ipconfig/renew again.

Step 6 For Windows 95/98/ME go to Start, Run, type winipcfg and click OK.

Step 7 Select your network card from the drop-down menu and click Release.

Image 4
Contents Quick Installation Guide Section Connect the RouterVerify Connection to Router Page Configure the Router DSL Static IP Example username@sbcglobal.net Pptp Page Verify Connection Status Troubleshooting For Cable Modem Users OnlyTechnical Support For DSL Users Only