Verify Connection to Router

Section 2

Step 1 Go to Start, Run, type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) and click OK. You will see the command prompt as below.

Step 2 Type ping 192.168.1.1 and press Enter. You should get four reply responses back.

Step 3 If you get Request timed out, or Destination host unreachable, double-check the network cable connection between the computer and the router and try Step 2 again. If you still encounter problem, go to the next step; otherwise proceed to Section 3, Configure the Router.

Step 4 For Windows 2000/XP, type ipconfig/release and press Enter.