Airlink101 AR504 manual Section, Connect the Router

Page 2

Section 1

This Quick Installation Guide only provides the basic instructions. For more detailed information, please refer to the user’s manual on the supplied CD.

Connect the Router

Note: Prior to connecting the router, be sure to power off your computer, DSL/Cable modem, and the router.

Step 1 Connect one end of a network cable to the WAN port of the router and connect the other end of

the cable to the DSL/Cable modem.

Step 2 With another network cable, connect one end of the cable to your computer’s network card and connect the other end to one of the LAN ports of the router.

Step 3 Power on the DSL/Cable modem and wait for the lights on the modem to settle down.

Step 4 Power on the router by connecting one end of the supplied power adapter to the power jack of the router and connecting the other end to an electrical outlet.

Step 5 Power on your computer.

Step 6 Make sure the WAN and the LAN port that the computer is connected to are lit. If not, try the above steps again.

Image 2
Contents Quick Installation Guide Section Connect the RouterVerify Connection to Router Page Configure the Router DSL Static IP Example username@sbcglobal.net Pptp Page Verify Connection Status Troubleshooting For Cable Modem Users OnlyTechnical Support For DSL Users Only