Step 3 Click on Wizard from the main menu to open the Setup Wizard.
Step 4 Click Next to begin the Setup Wizard.
Step 5 Select your WAN Type (Internet Connection Type) and click Next. If you are not sure what your Internet Connection Type is, please contact your Internet Service Provider (ISP) for assistance.
Static IP
If your ISP provided you with a static IP address, select ISP assigns you a static IP address (Static IP Address) and click Next. Proceed to Step 6, Static IP.
Cable Modem
If you use cable modem, select Obtain an IP address from ISP automatically (Dynamic IP Address) and click Next. Proceed to Step 6, Cable Modem.
Road Runner
If your ISP is running Road Runner Session Management, select Dynamic IP Address with Road Runner Session Management (e.g. Telstra BigPond) and click Next. Proceed to Step 6, Road Runner.
DSL
If you use DSL, select Some ISPs require the use of PPPoE to connect to their services (PPP over Ethernet) and click Next. Proceed to Step 6, DSL.
PPTP
If you use PPTP, select Some ISPs require the use of PPTP to connect to their services (PPTP) and click Next. Proceed to Step 6, PPTP.
L2TP
If you use L2TP, select Some ISPs require the use of L2TP to connect to their services (L2TP) and click Next. Proceed to Step 6, L2TP.