Altec Lansing 3151 manual SIX-PIECE Powered, Audio System

VS3151	SIX-PIECE POWERED
	AUDIO SYSTEM

Thank you for purchasing this Altec Lansing product. For generations, Altec Lansing has been first in audio innovation. Today, our line of powered speakers has received more performance awards than any other brand. In all kinds of desktop environments, in every price range, Altec Lansing offers sound of distinction — giving even the most demanding customers the audio enjoyment they seek. Just listen to this!

BOX CONTENTS

•5 Speakers

•Subwoofer

•Control Pod

•User’s Guide

•Quick Connect Card (may be located on internal box flaps)

PLACING SPEAKERS

SUBWOOFER

All stereo-encoded information is heard through the satellite speakers.

The subwoofer contains no stereo imaging, and its sound is non-directional. As a result, the subwoofer doesn’t have to be placed in any particular relationship to the satellites. However, placing the subwoofer on the floor close to a wall or room corner provides better bass efficiency and optimum sound.

Warning: The subwoofer is not magnetically shielded. As such, it SHOULD be placed at least 2 feet (0.6m) from TVs, computer monitors, computer hard drives or any other magnetic media (e.g. floppy disks, Zip disks, computer or audio tapes, etc.).

FRONT SATELLITE SPEAKERS

Arrange the front satellite speakers to suit your listening tastes — from right next to the monitor to as far apart as the speaker cords allow. Use the key hole on the back of each speaker if you choose to mount them on the wall.

INPUTS

Various connection schemes between your audio source and the speaker system are available. Determine if you’ll be setting up the speaker system for PC audio/PC gaming, DVD playback, console gaming or with portable audio devices (such as MP3 or portable CD players), then skip to the appropriate section.

PC AUDIO/PC GAMING/DVD PLAYBACK

Sound cards designed for PC gaming or DVD playback have unique audio outputs. Typically, the outputs will be marked as “front output,” “rear output” and “LFE/center output.” In some cases, slightly different terminology may be used. The sound card’s documentation should help you determine which outputs to use with your speaker system.

6-CHANNEL/5.1 SOUND CARDS WITH ANALOG OUTPUTS

1.Locate the cable with black, green, and orange 3.5 mm stereo plugs that is hardwired to the back of the control pod.

2.Remove the protective covers from the black and orange plugs.

3.Insert the black, green and orange input plugs into the computer soundcard’s black, green and orange outputs. Be sure that the switch on the rear of the subwoofer is in the 6-channel position.

4-CHANNEL GAMING SOUND CARDS

1.Locate the cable with black, green, and orange 3.5 mm stereo plugs that is hardwired to the back of the control pod.

2.Remove the protective cover from the black plug.

3.Insert the black and green input plugs into the computer soundcard’s black and green output. Be sure the switch on the rear of the subwoofer is in the 2/4-channel position.

2-CHANNEL/STEREO SOUND CARDS

1.Locate the cable with black, green, and orange 3.5 mm stereo plugs that is hardwired to the back of the control pod.

2.Insert the green input plug into the computer’s stereo (green) output. Be sure the switch on the rear of the subwoofer is in the 2/4-channel position.

CENTER SPEAKER

Place the center speaker either on top or below the center of the monitor. Use the key holes on the back of the center speaker if you choose to mount it on the wall.

REAR SATELLITE SPEAKERS

The rear satellite speakers should be placed slightly behind you, or as far back as the cords allow. Use the key hole on the back of each speaker if you choose to mount them on the wall.

For optimum sound, all satellites should be placed at or slightly above ear level, and in an arrangement that offers the most satisfying results.

Note: The satellite speakers ARE magnetically shielded and can be placed close to video displays such as TVs and computer monitors without distorting the image.

MAKING CONNECTIONS

Warning: Do not insert the speaker system’s power plug into a wall outlet until all connections are made. Also, turn off audio source (i.e., your PC, MP3 player, Sony PlayStation, etc.) before connecting the outputs to the speaker system’s inputs.

To ensure first-time operation as expected, please carefully follow the connection sequences described below in the order indicated.

SPEAKER SYSTEM

To set-up the speaker system:

1.Connect each satellite to the subwoofer by plugging each color-coded RCA connector into the corresponding input on the back of the subwoofer.

2.Connect the control pod to the subwoofer by plugging the grey DIN connector (hardwired into the control pod) into the corresponding DIN input on the back of the subwoofer. Notice that the DIN plug has an arrow. For easy insertion of the DIN connector, the arrow on the connector must face up.

CONSOLE GAMING

Most console game systems feature dual-RCA outputs. To connect your speakers, follow the steps below:

1.Make sure the power to your console gaming system is turned off.

2.Locate the red and white RCA cable that came with your console gaming system.

3.Connect one end of the RCA cable to the matching red and white RCA jacks located on the speaker system’s control pod, and the other end to the back of your console gaming system.

PORTABLE AUDIO DEVICES (MP3, PORTABLE CD PLAYERS, ETC.)

1.Locate the cable with black, green, and orange 3.5 mm stereo plugs that is hardwired to the back of the control pod.

2.Insert the green input plug into the headphone jack of the portable audio device. Be sure the switch on the rear of the subwoofer is in the 2/4-channel position.

POWERING ON

1.After all other connections are made, plug the AC power cord (on the back of subwoofer) into a wall outlet. The speaker system is now ready to operate.

2.Turn on the audio source.

3.Turn on the speaker system by pushing the On/Off button located on the control pod . An LED will light on the control pod when the power is ON.

Note: To avoid hearing a popping sound when you turn on your Altec Lansing speaker system, always turn on your audio source first.

MASTER VOLUME

The VOLUME knob on the control pod controls the master volume. Turn the knob clockwise to increase the volume and counterclockwise to decrease the volume.

2