Panasonic DP-180 ORIG. SET Beep ADF, 1INVALID / 2VALID DEPT. Counter Mode, Total Counter

Page 37

■General Settings (For Key Operator) (Continued)

	No.	Modes	Function	Initial
	No.	Modes	Function	Setting
				Setting
	11	ORIG. SET BEEP ADF	Selects whether to enable the sound when	2:VALID
			paper is placed on the ADF.
			1:INVALID / 2:VALID

	13	DEPT. COUNTER MODE	Monitors the copy usage of each department.	Consult your
			1: TOTAL COUNTER	authorized
			2: DEPT. COUNTER	service provider
			3: DEPARTMENT LIST

	16	LANGUAGE PRIORITY	Selects whether to enable the language selection	1:OFF
			menu to display when the machine comes out of
			the Energy Saver Mode, or when the RESET
			button is pressed once.
			1:OFF / 2:ON

	17	DATE & TIME	Sets the date and time.
			Day, Month, Year, Time
			Input the date and time using the Cursor Keys
			and the Keypad.

	18	DAYLIGHT TIME	Selects whether to enable the daylight time feature.	2:VALID
			1:INVALID / 2:VALID

	19	IP ADDRESS (DHCP)1,2	Displays the address which was reserved by
			DHCP server.

	20	SUBNET MASK (DHCP)1,2	Displays the address which was reserved by
			DHCP server.

	21	DEF. G/W IP (DHCP)1,2	Displays the address which was reserved by
			DHCP server.

	22	DHCP DEFAULT*4	Selects whether to enable the DHCP.	2:VALID
			1:INVALID / 2:VALID

	23	DNS SERVER ADDR*2	Selects whether to enable the DNS Server, and	2:VALID
			sets its settings for Internet Fax/Email Function.
			1:INVALID
			2:VALID
			<Sub Function>
			1:HOST NAME / 2:DOMAIN NAME /
			3:PRI. DNS SERVER (IP ADDRESS1) /
			4:SEC. DNS SERVER (IP ADDRESS2)

	24	MAC ADDRESS	Indicates the MAC address.
	25	*3	Formats the hard disk.
	25	HARD DISK FORMAT	Formats the hard disk.
	26	HARD DISK ERR CHK*3	Selects the provision for the hard disk error check.
	27	ABBR GROUP ID	Inputs the group ID for the address book.	0
			0-99

	28	COMMUNITY NAME(1)*2	Selects whether to change the Community	public
			Name(1) SNMP.
			Enables read only.

	29	COMMUNITY NAME(2)*2	Selects whether to change the Community	public
			Name(2) SNMP.
			Enables read/write.

NOTE *1	When setting other than DHCP server Network settings, Parameter No. “22 DHCP DEFAULT” should be set to “INVALID”
*2	first, then setup Parameter No.19 to 21.
*2	When Parameter No.19 to 23 (except 22) and No. 28, 29 are set, cycle the power by turning the Power Switch on the Left
*3	Side of the machine OFF and ON.
*3	Available only when the optional Hard Disk Drive Unit is installed.
*4	When not connecting to LAN, setting of DHCP should be INVALID. When setting of DHCP at VALID and the

machine is in Shutdown Mode, there may fax reception would not be accepted.

Function

37

Image 37

Contents English Function Problem Solving Network ScannerMaking Copies Before Starting Multi-Tasking Job Table Useful Office FunctionsOperating Instructions Outline Place originals on the ADF Symbols/IconsFunction Table of Contents Getting to Know Your MachineProblem Solving Table of Contents Network ScannerAppendix Laser Safety PrecautionsFor Your Safety Others Consumable Safeguards It is unlawful to make copies of certain documents SuppliesAND-YELLOW For U.KBlack Original Position ProceduresHole Cover Quick Operation Chart Operation ChartMaking Copies Before Pressing Start KeyReplacing Toner Cartridge and/or Drum Unit To replace the Toner Cartridge CleanerTo replace the Drum Unit For replacing the Toner Cartridge onlyJ43, J44, J80 J44, J82, J83Removing Misfed Paper ADF J70, J71, J79, J90, J92, J93 Paper Transport Knob Front Cover Misfed PaperJam Error Codes J Code User Error Codes U CodeCode Check Points Adding Paper / Sheet Bypass CorrectIncorrectAdding Paper / Tray-2 Resolution Key Original Size Key Icon Contents Memory in key Color KeyM1 Key Original KeyAlarm LED RED Lights/Flashes when trouble occurs Icon Contents Reset KeyIcon Contents Keypad Sets copy quantities or Function settingsCopying with Preset or Variable Zoom Ratios Sort ModeBasic Copy Copying the Same Size OriginalsUsing the ADF Copy Creative FeaturesCopy, 2 1 Copy From Exits this modePlaten only For 2 1 Copy1 Copy Mode Originals LayoutCombination for N in 1 copy operation AvailableSteps 7 to 11 from Platen only For Preset Ratios A4 A4-R A5 A5-RSkyshot Mode Other FeaturesDigital Skyshot Mode Double ExposureA4 A4-R A5 A5 A5-R 4- 2 to step Starts making copiesPower Saver Mode Energy Saver Power Saver Mode, Sleep/Shutdown ModeSleep/Shutdown Mode Job Memory Set upTo store a job in memory To recall a job stored in memoryProcedure Using Function Modes to Change the Initial Machine ModesGeneral Settings Printer SettingsWhen selecting the Key Operator Mode Ex. General Settings Copier SettingsModes Function Initial Setting General SettingsDhcp Default 1INVALID / 2VALID DEPT. Counter ModeORIG. SET Beep ADF 2VALIDCopier Settings Printer Settings Symbol Table PCL 1LONG Edge / 2SHORT Edge ResolutionPrinter Settings Sided PrintScanner Settings Scan Parameters For Example If set in other function modeChanging the Paper Size Paper Tray Changing the Paper Size Sheet BypassFor LETTER/A4 Select Paper SizeOthers Department Counter Network SettingsFor Department Counter For Maximum Copies For ID Identification Code19 TCP/IP Address SETDocument Scanning Document ScanningSelect a Station PCs IP Address Abbr 23-3Name SearchAdding your PCs IP Address Address BookEditing/Erasing your PCs IP Address Enter a Station Name Scan Parameters Select ModeFor Scan File Name For CompressionFor Gray Scale Remote Copy Remote CopyNetwork Remote Copy NO. of COPY= Direct Connection with Crossover Cable Direct Connection with Crossover CableMachine Rear Side of Machine To PCFor Windows XP For WindowsSubnet Mask Check Action TroubleshootingUnit Does Not Operate Light CopiesMarked Copies Machine CareSheet Platen glassBattery Holder Replacing the Battery/Set the Date and TimeSet the Date and Time continues steps 6 to New UsedDP-180 For Copier SpecificationsADF Standard FLS2nd Paper Feed Module DA-DS188 Option Network Scanner StandardCombined Function Table Next SelectionsOptions Options and SuppliesSupplies Part Name RemarksImportant Information Energy Star For Service, Call