Panasonic DP-180 Sided Print, Bind Position, 1LONG Edge / 2SHORT Edge Resolution, Font PCL*1

Function

■Printer Settings (Continued)

No.	Modes	Function	Initial
			Setting
05	2-SIDED PRINT	Selects whether the 2-Sided print setting is	1:OFF
		enabled.
		1:OFF / 2:ON
06	BIND POSITION	Sets the bind position.	1:LONG EDGE
		1:LONG EDGE / 2:SHORT EDGE
07	RESOLUTION	Sets the resolution setting.	2:600dpi
		1:300dpi / 2:600dpi / 3:1200dpi
08	FONT (PCL)*1	Sets the PCL font.	0
		0-99
09	SYMBOL TABLE (PCL)*1	Sets the PCL symbol table.	11
		0-35
10	PITCH (PCL)*1	Sets the PCL pitch.	10.00
		0.44-99.99
11	POINT SIZE (PCL)*1	Sets the PCL point size.	12.00
		4.00-999.75
12	LINES/PAGE (PCL)*1	Sets the PCL lines/page.	60
		5-128
13	RETURN CHARACTER (PCL)*1	Sets the PCL return character.	1:CR
		1:CR / 2:CR+LF
14	MUTUAL A4/LETTER	Selects whether the mutual size A4/LETTER is	1:OFF
		enabled.
		1:OFF / 2:ON
15	MAILBOX MEMORY*2	Indicates the mailbox memory status.
19	KEY OPERATOR MODE	Inputs the key operator password.
		ENTER PASSWORD =

*1 Available only when the optional Printer Controller Module is installed. *2 Available only when the optional Hard Disk Drive Unit is installed.

The following Parameter Settings require the input of the Key Operator Password:

■Printer Settings (For Key Operator)

No.	Modes	Function	Initial
			Setting
00	PRINTER SETTINGS	Prints the printer settings.
		PRESS SET TO PRINT
01	COMPLETION TIME	Sets the job completion time setting.	180SEC
		1-999SEC (second)
02	PAGE PROTECTION	Selects whether to enable automatic	1:OFF

compression when the received data exceeds the page memory capacity.

(This is accomplished by reducing resolution, and/or deleting pixels to fit the data onto the available page memory, then print it out.) When the setting is in the "OFF" position, upon exceeding the page memory capacity, the print job is deleted and an Error message is displayed. 1:OFF / 2:ON

<to be continued>

40