3
Install the BJ® Cartridge
Spilled ink can stain any surface.
Open BJ cartridges and tanks very carefully.
See your User's Manual for complete details Caution
on BJ cartridge and tank maintenance.
Make sure the MultiPASS is plugged in.
The LCD reads:
1Open the ADF.
Handle
Do not touch the ribbon cable, the small circuit board, the guide rail, or the round shaft. Touching these parts may adversely
Caution affect operation of the unit and/or affect print quality.
Round Shaft | Guide Rail |
Circuit Board
Ribbon Cable
2 Raise the blue cartridge | Lock Lever |
lock lever |
|
on the |
|
cartridge |
|
holder. |
|
3Remove the cartridge from its package, and remove these protective materials:
Orange cap
Orange tape | Cap |
Tape
Do Not Touch these areas
4 Set the cartridge into the cartridge holder.
5 Lower the blue cartridge lock lever until it locks into place.
6 Remove the two orange pieces.
Press in on the tabs to remove the pieces.