FaxPress Xerox Interface Guide
3.Configure the Server Fax Kit on each Xerox WorkCentre Pro.
4.Install and Configure the necessary Xerox print drivers.
5.Install the FaxPress Client software on the workstation that you intend to use for this FaxPress Xerox Interface, and create a Fax- Press user for each WorkCentre Pro.
6.Install the FaxPress Xerox Interface software on the workstation.
7.Configure theFaxPress Xerox Interface software, using the Fax- Press Xerox Interface Configuration utility.
After completing these procedures, test the system by scanning a document and sending a fax, then sending a fax to a user on the local area network who is registered in the system’s user map, then checking the notices generated for these transactions.