Installing the FaxPress Xerox Interface
Configuring the FaxPress Xerox Interface
Use the following procedure to configure your FaxPress Xerox Interface. You will already be in the FaxPress Xerox Interface Configuration screen if you have just finished installing the FaxPress Xerox Interface software on the workstation you are using for it. If you have exited from the Installation/Configuration program, you can access the configuration utility by choosing this command:
Start>Programs>FaxPress>Add On Products>Xerox Interface>Configuration
See Accessing the FaxPress Xerox Interface Configuration Utility on page
1.The tabs in this screen let you make settings for your FaxPress Xerox Interface, so it can send and receive faxes from the Xerox system via the FaxPress server, and establish the mappings for