FaxPress Xerox Interface Guide
4.The Properties screen for the Xerox system appears. Click the Printing Preferences button to open the Preferences screen.
5.Typically, you can leave all the settings at their defaults. One exception; if you have enabled Network Accounting on your Xerox WorkCentre Pro, you must specify the default User ID and the System ID in the Device Settings tab (Accounting>Setup) of the printer driver properties. If your situation requires special set- tings, make them with caution. Castelle recommends that you do NOT change any of the advanced options unless you ar certain that the changes will work without any unwanted
6.When you have the settings as you want them, click OK.
7.Test the printer from the workstation, and test printing a fax or fax notification.
If you want to set up the Xerox system so it prints faxes and/or fax notifications in special colors proceed to the next section of this chapter.