Configuring Server Fax Kit
Setting up the Server Fax Kit on Your Xerox System.
After you have set up the Xerox WorkCentre or Document Centre system on your local network, assign the unit a static IP address. Then take the following steps to configure the Server Fax Kit for operation with the FaxPress server and the FaxPress Xerox Interface.
1.Open your Web browser on a workstation connected to the local network.
2.Type the static IP address of the Xerox system in the address bar of the Web browser; for example, http://192.128.128.14. When you press enter, a screen similar to the figure below will appear.