Furuno FAX-30 manual Phasing signal out of synchronization, Noise rejection, Sync entry window

Page 36

2. FAX OPERATION: NAVNET

2.5.2Phasing signal out of synchronization

The SYNC soft key functions to fine tune the phasing signal. If the dead sector is plotted at an angle even when the phase is properly selected, adjust the synchronization to display the dead sector straightly.

Example of phasing signal out of synchronization

1.With a facsimile image displayed (see paragraph 2.4), press the EDIT IMAGE soft key.

2.Press the SYNC soft key.

SYNC

▲

+00

▼

Sync entry window

3.Enter a sync value that displays the dead sector straightly. If the dead sectors appears as in the left-hand figure in example of phasing signals in the illustration above, enter a larger value and for the right-hand figure, enter a smaller value. The setting range is –50 to +50.

4.Press the ENTER soft key.

5.Press the RETURN soft key several times to return to the standby display.

2.5.3Noise rejection

If noise speckles appear on the image, turn on the noise rejector as below to remove the noise.

1.With a facsimile image displayed (see paragraph 2.4), press the EDIT IMAGE soft key.

2.Press the NOISE REJECT soft key.

NOISE REJECT

▲°

§OFF LOW MEDIUM

HIGH

▼

Noise rejector options

3.Rotate the [ENTER] knob to choose the noise rejection level desired. HIGH provides the greatest degree of noise rejection.

4.Press the ENTER soft key.

5.Press the RETURN soft key several times to return to the standby display.

2-14

offered by Busse-Yachtshop.com

Image 36

Contents Facsimile Receiver First E D I T I O N Safety Instructions Safety Instructions for the Installer Table of Contents Navtex Operation Navnet Appendix Features ForewordWord to the Owner of the FAX-30 Operational Characteristics ViiGeneral NavNetViii System Configuration Network installationNetwork installation PC installation Facsimile ReceiverEquipment Lists Standard supplyName Type Code No Qty Remarks Optional supply XiiName Type Code No Remarks OVERVIEW, Setup Overview, Setup NavNetControls ControlsPreparations for using the FAX-30 Select sentence windowAccessing the FAX mode FAX-30, top viewDisplay selection window Choosing the receive mode Receive mode setup screenRX mode options Standby displayReceive notification RX notice optionsOverview, Setup PC Accessing the FAX-30 top displayFacsimile receiver top display Standby displays RX Mode Logging outFAX Operation Navnet Automatic ReceivingChoosing channel Thumbnails of received imagesFax channel setup window Zone optionsStation options Example stations of northwest pacific Channel options Example JMH/Tokyo Frequency entry windowPreviewing image being received Stopping automatic receivingFacsimile receiving display Manually Starting, Stopping Receiving Manually starting receivingStart RX options Wrong Speed or IOC and Image Manually stopping receivingWrong speed 60 chosen instead Wrong speed 120 chosen insteadTimer Receiving Setting timer receiving scheduleTimer setup screen Timer schedule listTimer schedule menu Station options Example N Pacific W PartChannel options Example station JMH IOC optionsDrum speed options Start time entry windowStart timer options End time entry windowSave window Turning on/off specific timer programs Clearing all timer programsClear all options Displaying Facsimile Images Facsimile imagePhase mismatch Example of phase mismatchingPhase entry window Processing Facsimile ImagesPhasing signal out of synchronization Example of phasing signal out of synchronizationNoise rejection Sync entry windowImage color Image formatColor options Reverse image optionsErasing Facsimile Images Zooming imagesRotating images Erase image optionsPreventing Erasure of Facsimile Images Adding Facsimile Channels FAX-30 top 2. Press the Edit WX FAX Station soft keyEdit facsimile station menu Station options Example stations of northwest pacific Frequency, call sign and station name entry windows Channel setup menu FAX Operation PCStarting receiving Stopping receivingSetting, changing timer receiving schedule Timer program listTimer Program No.2 Timer program menuTurning on/off specific timer programs Facsimile standby display TopPhase Example of phasing signal out of synchronizatio Sync optionsColor Saving images Lock Lock optionsEdit Station List Edit station list menuThis page intentionally left blank Navtex Operation Navnet About Navtex MessagesMessage categories Receiving navtex messagesSetting Up Navtex Stations, Messages, Alarms RX setup menuNavtex message data display Navtex frequency optionsNavtex station mode options Navtex station optionsNavtex message options Max error rate entry window Alarm SAR MSG optionsAlarm warning msg options Previewing Incoming Navtex Messages Navtex message selection screenNavtex message preview display Displaying Navtex Messages Displaying navtex messagesSample navtex message Remarks on navtex messages Displaying the Navtex Station List Nav areas for 490 kHz navtex stationsKHz stations of nav area Adding Navtex Stations Edit station menuEdit navtex station menu Nav area selection windowStation name entry window Station ID1 entry windowLatitude entry window Navtex Operation PC Setting Up Navtex Stations, Messages RX SetupNavtex standby display Received messages click to display490kHz Station List Navtex station listEdit station list Editing Navtex Stations CullercoatsDeleting Navtex Stations This page intentionally left blank MAINTENANCE, Troubleshooting MaintenanceMaintenance points Check Point ActionReplacement of Fuse TroubleshootingTroubleshooting Trouble Problem RemedyDiagnostics NavNet System setup menuFAX-30 menu Diagnostics PC Diagnostic test resultsClearing Data NavNet Clear memory menuClear all images options Clearing Data PC Clear memory optionsAll Clear for technicians only FAX-30, cover openedSimulation Mode Accessing the simulation mode through NavNetSimulation setup menu Accessing the simulation mode through PC SIMULATION§ Setup WX FAX §SIMULATION Live Navtex SimulationThis page intentionally left blank Installation Mounting dimensions of facsimile receiver FAX-30Facsimile Receiver Wire antenna or whip antenna Antenna wiring and preamp statusAntenna Unit General antenna connectionInstallation of preamp unit FAX-5 option How to mount the preamp unit FAX-5Wiring WiringPower cable Ground wireWire or whip antenna Attachment of antenna connectorSupplying Power to the Preamp Unit JIS cable specificationsFAX-30, top view, cover removed Browser, PC Settings Browser settingsInternet Explorer Version Netscape Navigator VersionPC settings FAX-30IP address Appendix Facsimile StationsFacsimile station map AP-1AP-2 ZoneAP-3 Facsimile station list alphabetical orderNavtex Stations Navtex stations mapAP-4 Location of navtex stationsNavtex stations list AP-5AP-6 AP-7 VIIAP-8 XIIMenu Tree NavNet menu treeAP-9 Soft keysAP-10 Menu keyPC Menu tree AP-11Facsimile menu tree AP-12 Navtex menu treeSpecifications of Facsimile Receiver This page is intentionally left blank ＰａｃｋｉｎｇＬｉｓｔ FAX-30-J/E-AP FAX-30-J/E-N Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Index IN-1IN-2 IndexOffered by Busse-Yachtshop.com

Related manuals

Manual 115 pages 15.65 Kb