Furuno FAX-30 manual Max error rate entry window, Alarm SAR MSG options, Alarm warning msg options

Page 58

4. NAVTEX OPERATION: NAVNET

MAX ERROR RATE

33%

Max error rate entry window

14.Rotate the [ENTER] knob to enter maximum allowable error rate to use. The setting range is 0-33%. Any message with an error rate higher than that entered here will be rejected.

15.Press the ENTER soft key.

16.Rotate the [ENTER] knob to choose ALARM (SAR MSG) and press the EDIT soft key.

ALARM (SAR MSG)

▲

§°ON

OFF

▼

Alarm (SAR MSG) options

17.Rotate the [ENTER] knob to choose ON to get the audio alarm when an SAR (Search and Rescue) message is received, or OFF for no audio alarm when an SAR message is received.

Note: Message category D must be selected to get the audio alarm.

18.Press the ENTER soft key.

19.Rotate the [ENTER] knob to choose ALARM (WARNING MSG) and press the EDIT soft key.

ALARM (WARNING MSG)

▲

§°ON

OFF

▼

Alarm (warning msg) options

20.Rotate the [ENTER] knob to choose ON to get the audio alarm when an A, B, or L category message is received, or choose OFF for no audio alarm.

Note: Message category A, B or L must be selected to get the audio alarm.

21.Press the [RETURN] soft key.

Note: When the above alarms are enabled, the audio alarm sounds and the speaker icon () appears when an SAR message or category A, B, D or L message is received. Press the [CLEAR] key to silence the audio alarm. You can see which type of message you have received by pressing the [ALARM] key to display the alarm message board.

4-4

offered by Busse-Yachtshop.com

Image 58

Contents Facsimile Receiver First E D I T I O N Safety Instructions Safety Instructions for the Installer Table of Contents Navtex Operation Navnet Appendix Foreword FeaturesWord to the Owner of the FAX-30 General Operational CharacteristicsVii NavNetViii Network installation System ConfigurationNetwork installation PC installation Facsimile ReceiverStandard supply Equipment ListsName Type Code No Qty Remarks Xii Optional supplyName Type Code No Remarks Controls OVERVIEW, SetupOverview, Setup NavNet ControlsPreparations for using the FAX-30 Select sentence windowFAX-30, top view Accessing the FAX modeDisplay selection window RX mode options Choosing the receive modeReceive mode setup screen Standby displayReceive notification RX notice optionsAccessing the FAX-30 top display Overview, Setup PCFacsimile receiver top display Standby displays RX Mode Logging outChoosing channel FAX Operation NavnetAutomatic Receiving Thumbnails of received imagesZone options Fax channel setup windowStation options Example stations of northwest pacific Channel options Example JMH/Tokyo Frequency entry windowStopping automatic receiving Previewing image being receivedFacsimile receiving display Manually starting receiving Manually Starting, Stopping ReceivingStart RX options Wrong speed 60 chosen instead Wrong Speed or IOC and ImageManually stopping receiving Wrong speed 120 chosen insteadTimer setup screen Timer ReceivingSetting timer receiving schedule Timer schedule listTimer schedule menu Station options Example N Pacific W PartDrum speed options Channel options Example station JMHIOC options Start time entry windowEnd time entry window Start timer optionsSave window Clearing all timer programs Turning on/off specific timer programsClear all options Displaying Facsimile Images Facsimile imagePhase entry window Phase mismatchExample of phase mismatching Processing Facsimile ImagesNoise rejection Phasing signal out of synchronizationExample of phasing signal out of synchronization Sync entry windowColor options Image colorImage format Reverse image optionsRotating images Erasing Facsimile ImagesZooming images Erase image optionsPreventing Erasure of Facsimile Images FAX-30 top 2. Press the Edit WX FAX Station soft key Adding Facsimile ChannelsEdit facsimile station menu Station options Example stations of northwest pacific Frequency, call sign and station name entry windows Starting receiving Channel setup menuFAX Operation PC Stopping receivingSetting, changing timer receiving schedule Timer program listTimer Program No.2 Timer program menuTurning on/off specific timer programs Facsimile standby display TopPhase Example of phasing signal out of synchronizatio Sync optionsColor Saving images Lock Lock optionsEdit Station List Edit station list menuThis page intentionally left blank Message categories Navtex Operation NavnetAbout Navtex Messages Receiving navtex messagesNavtex message data display Setting Up Navtex Stations, Messages, AlarmsRX setup menu Navtex frequency optionsNavtex station options Navtex station mode optionsNavtex message options Alarm SAR MSG options Max error rate entry windowAlarm warning msg options Navtex message selection screen Previewing Incoming Navtex MessagesNavtex message preview display Displaying navtex messages Displaying Navtex MessagesSample navtex message Remarks on navtex messages Nav areas for 490 kHz navtex stations Displaying the Navtex Station ListKHz stations of nav area Edit navtex station menu Adding Navtex StationsEdit station menu Nav area selection windowStation ID1 entry window Station name entry windowLatitude entry window Navtex Operation PC Setting Up Navtex Stations, Messages RX SetupNavtex standby display Received messages click to display490kHz Station List Navtex station listEdit station list Editing Navtex Stations CullercoatsDeleting Navtex Stations This page intentionally left blank Maintenance points MAINTENANCE, TroubleshootingMaintenance Check Point ActionTroubleshooting Replacement of FuseTroubleshooting Trouble Problem RemedySystem setup menu Diagnostics NavNetFAX-30 menu Diagnostics PC Diagnostic test resultsClear memory menu Clearing Data NavNetClear all images options Clearing Data PC Clear memory optionsAll Clear for technicians only FAX-30, cover openedAccessing the simulation mode through NavNet Simulation ModeSimulation setup menu Accessing the simulation mode through PC SIMULATION§ Setup WX FAX §SIMULATION Live Navtex SimulationThis page intentionally left blank Mounting dimensions of facsimile receiver FAX-30 InstallationFacsimile Receiver Antenna Unit Wire antenna or whip antennaAntenna wiring and preamp status General antenna connectionInstallation of preamp unit FAX-5 option How to mount the preamp unit FAX-5Wiring WiringWire or whip antenna Power cableGround wire Attachment of antenna connectorJIS cable specifications Supplying Power to the Preamp UnitFAX-30, top view, cover removed Internet Explorer Version Browser, PC SettingsBrowser settings Netscape Navigator VersionFAX-30 PC settingsIP address Facsimile station map AppendixFacsimile Stations AP-1AP-2 ZoneAP-3 Facsimile station list alphabetical orderAP-4 Navtex StationsNavtex stations map Location of navtex stationsNavtex stations list AP-5AP-6 AP-7 VIIAP-8 XIIAP-9 Menu TreeNavNet menu tree Soft keysAP-10 Menu keyAP-11 PC Menu treeFacsimile menu tree AP-12 Navtex menu treeSpecifications of Facsimile Receiver This page is intentionally left blank ＰａｃｋｉｎｇＬｉｓｔ FAX-30-J/E-AP FAX-30-J/E-N Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Index IN-1IN-2 IndexOffered by Busse-Yachtshop.com

Related manuals

Manual 115 pages 15.65 Kb