Furuno FAX-30 manual Power cable, Ground wire, Preamp unit, Wire or whip antenna

Page 87

7. INSTALLATION

Power cable

Connect the power cable (supplied) to the power source; white wire to positive [+] terminal and black wire to negative [-] terminal.

Ground wire

Ground the equipment to prevent noise and interference and enable reception of weak signals. Run the ground wire (local supply) between the ground terminal on the facsimile receiver and the ship's grounding bus.

Preamp unit

Connect its coaxial cable directly to the antenna connector on the FAX-30. Note that an extension cable kit (option) is available, in lengths of 10, 20, 30, 40 and 50 m.

Wire or whip antenna

A junction box or antenna switch (local supply) is required since the connection at the FAX-30 is made with a coaxial cable. Connect a feeder wire between the antenna and the junction box or antenna switch. Attach coaxial connector (option) to a 50 ohm coaxial cable as below and connect the cable between the junction box and the FAX-30. If the connector does not fit the cable, use appropriate adaptor (option).

Cable type 7C-2V, RG-8/U, RG-213/U, etc.

30 mm

Sheath 5 mm

2 mm

Plug assembly	Contact sleeve
	Solder here.

Braided

Conductor

Cut conductor here.

shield Insulator

Coupling	Solder both
ring	sides of hole.

Cable type 5D-2V, 5C-2V, RG-5/U, 3C-2V, RG-58/U, etc.

30 mm

Sheath 7 mm

3.5 mm

Conductor

BraidedReducer

shield Insulator

3.5 mm	Screw tightly. Contact sleeve
		Solder here.
Solder both	Coupling	Cut conductor here.
	Coupling

sides of hole.	ring

Attachment of antenna connector

Note: The cables 3C-2V, 5C-2V, 5D-2V and 7C-2V are JIS (Japan Industry Standard) cables. If these are not available use equivalent cables, referring to the table on the next page for specifications.

7-5

offered by Busse-Yachtshop.com

Image 87

Contents Facsimile Receiver First E D I T I O N Safety Instructions Safety Instructions for the Installer Table of Contents Navtex Operation Navnet Appendix Features ForewordWord to the Owner of the FAX-30 NavNet Operational CharacteristicsVii GeneralViii System Configuration Network installationNetwork installation Facsimile Receiver PC installationEquipment Lists Standard supplyName Type Code No Qty Remarks Optional supply XiiName Type Code No Remarks Controls OVERVIEW, SetupOverview, Setup NavNet ControlsSelect sentence window Preparations for using the FAX-30Accessing the FAX mode FAX-30, top viewDisplay selection window Standby display Choosing the receive modeReceive mode setup screen RX mode optionsRX notice options Receive notificationOverview, Setup PC Accessing the FAX-30 top displayFacsimile receiver top display Standby displays Logging out RX ModeThumbnails of received images FAX Operation NavnetAutomatic Receiving Choosing channelFax channel setup window Zone optionsStation options Example stations of northwest pacific Frequency entry window Channel options Example JMH/TokyoPreviewing image being received Stopping automatic receivingFacsimile receiving display Manually Starting, Stopping Receiving Manually starting receivingStart RX options Wrong speed 120 chosen instead Wrong Speed or IOC and ImageManually stopping receiving Wrong speed 60 chosen insteadTimer schedule list Timer ReceivingSetting timer receiving schedule Timer setup screenStation options Example N Pacific W Part Timer schedule menuStart time entry window Channel options Example station JMHIOC options Drum speed optionsStart timer options End time entry windowSave window Turning on/off specific timer programs Clearing all timer programsClear all options Facsimile image Displaying Facsimile ImagesProcessing Facsimile Images Phase mismatchExample of phase mismatching Phase entry windowSync entry window Phasing signal out of synchronizationExample of phasing signal out of synchronization Noise rejectionReverse image options Image colorImage format Color optionsErase image options Erasing Facsimile ImagesZooming images Rotating imagesPreventing Erasure of Facsimile Images Adding Facsimile Channels FAX-30 top 2. Press the Edit WX FAX Station soft keyEdit facsimile station menu Station options Example stations of northwest pacific Frequency, call sign and station name entry windows Stopping receiving Channel setup menuFAX Operation PC Starting receivingTimer program list Setting, changing timer receiving scheduleTimer program menu Timer Program No.2Turning on/off specific timer programs Top Facsimile standby displayPhase Sync options Example of phasing signal out of synchronizatioColor Saving images Lock options LockEdit station list menu Edit Station ListThis page intentionally left blank Receiving navtex messages Navtex Operation NavnetAbout Navtex Messages Message categoriesNavtex frequency options Setting Up Navtex Stations, Messages, AlarmsRX setup menu Navtex message data displayNavtex station mode options Navtex station optionsNavtex message options Max error rate entry window Alarm SAR MSG optionsAlarm warning msg options Previewing Incoming Navtex Messages Navtex message selection screenNavtex message preview display Displaying Navtex Messages Displaying navtex messagesSample navtex message Remarks on navtex messages Displaying the Navtex Station List Nav areas for 490 kHz navtex stationsKHz stations of nav area Nav area selection window Adding Navtex StationsEdit station menu Edit navtex station menuStation name entry window Station ID1 entry windowLatitude entry window Navtex Operation PC RX Setup Setting Up Navtex Stations, MessagesReceived messages click to display Navtex standby displayNavtex station list 490kHz Station ListEdit station list Cullercoats Editing Navtex StationsDeleting Navtex Stations This page intentionally left blank Check Point Action MAINTENANCE, TroubleshootingMaintenance Maintenance pointsTrouble Problem Remedy Replacement of FuseTroubleshooting TroubleshootingDiagnostics NavNet System setup menuFAX-30 menu Diagnostic test results Diagnostics PCClearing Data NavNet Clear memory menuClear all images options Clear memory options Clearing Data PCFAX-30, cover opened All Clear for technicians onlySimulation Mode Accessing the simulation mode through NavNetSimulation setup menu SIMULATION§ Setup WX FAX §SIMULATION Live Navtex Simulation Accessing the simulation mode through PCThis page intentionally left blank Installation Mounting dimensions of facsimile receiver FAX-30Facsimile Receiver General antenna connection Wire antenna or whip antenna Antenna wiring and preamp status Antenna UnitHow to mount the preamp unit FAX-5 Installation of preamp unit FAX-5 optionWiring WiringAttachment of antenna connector Power cableGround wire Wire or whip antennaSupplying Power to the Preamp Unit JIS cable specificationsFAX-30, top view, cover removed Netscape Navigator Version Browser, PC SettingsBrowser settings Internet Explorer VersionPC settings FAX-30IP address AP-1 AppendixFacsimile Stations Facsimile station mapZone AP-2Facsimile station list alphabetical order AP-3Location of navtex stations Navtex StationsNavtex stations map AP-4AP-5 Navtex stations listAP-6 VII AP-7XII AP-8Soft keys Menu TreeNavNet menu tree AP-9Menu key AP-10PC Menu tree AP-11Facsimile menu tree Navtex menu tree AP-12Specifications of Facsimile Receiver This page is intentionally left blank ＰａｃｋｉｎｇＬｉｓｔ FAX-30-J/E-AP FAX-30-J/E-N Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com IN-1 IndexIndex IN-2Offered by Busse-Yachtshop.com

Related manuals

Manual 115 pages 15.65 Kb