Furuno FAX-30 manual PC settings, IP address

Page 90

7. INSTALLATION

7.5.2PC settings

The PC communicates with the FAX-30 via Internet protocol TCP/IP. Therefore, set IP address on the PC as below.

1.Start up the PC and open the Control Panel folder.

2.Open the Network and Dial-up Connections folder.

3.Double-click Local Area Connection.

4.Click Properties.

5.Check Internet Protocol (TCP/IP).

6.Click Properties.

7.Choose “Use the following IP address.”

8.Set the IP address for 172.31.100.100.

9.Set the Subnet mask for 255.255.0.0.

FACSIMILE RECEIVER
		FAX-30
IP Address: 172.31.8.1									Subnet Mask: 255.255.0.0
IP Address: 172.31.8.1
										PC
										PC
									HUB*	IP Address:
										172.31.100.100
										PC
										IP Address:
		* = HUB is not required to connect single PC.								172.31.100.101

IP address

10.Click OK.

11.Click OK.

12.Click Close button.

13.Turn the PC off and on again.

14.Start up the browser.

15.Enter the FAX-30’s URL: http://172.31.8.1 and press the [Enter] key.

The facsimile receiver top display should appear. If it does not appear, recheck above settings.

FACSIMILE RECEIVER

FAX-30

WX FAX

NAVTEX

LOGOUT

Facsimile receiver top display

7-8

offered by Busse-Yachtshop.com

Image 90

Contents Facsimile Receiver First E D I T I O N Safety Instructions Safety Instructions for the Installer Table of Contents Navtex Operation Navnet Appendix Features ForewordWord to the Owner of the FAX-30 General Operational CharacteristicsVii NavNetViii System Configuration Network installationNetwork installation PC installation Facsimile ReceiverEquipment Lists Standard supplyName Type Code No Qty Remarks Optional supply XiiName Type Code No Remarks Controls OVERVIEW, SetupOverview, Setup NavNet ControlsPreparations for using the FAX-30 Select sentence windowAccessing the FAX mode FAX-30, top viewDisplay selection window RX mode options Choosing the receive modeReceive mode setup screen Standby displayReceive notification RX notice optionsOverview, Setup PC Accessing the FAX-30 top displayFacsimile receiver top display Standby displays RX Mode Logging outChoosing channel FAX Operation NavnetAutomatic Receiving Thumbnails of received imagesFax channel setup window Zone optionsStation options Example stations of northwest pacific Channel options Example JMH/Tokyo Frequency entry windowPreviewing image being received Stopping automatic receivingFacsimile receiving display Manually Starting, Stopping Receiving Manually starting receivingStart RX options Wrong speed 60 chosen instead Wrong Speed or IOC and ImageManually stopping receiving Wrong speed 120 chosen insteadTimer setup screen Timer ReceivingSetting timer receiving schedule Timer schedule listTimer schedule menu Station options Example N Pacific W PartDrum speed options Channel options Example station JMHIOC options Start time entry windowStart timer options End time entry windowSave window Turning on/off specific timer programs Clearing all timer programsClear all options Displaying Facsimile Images Facsimile imagePhase entry window Phase mismatchExample of phase mismatching Processing Facsimile ImagesNoise rejection Phasing signal out of synchronizationExample of phasing signal out of synchronization Sync entry windowColor options Image colorImage format Reverse image optionsRotating images Erasing Facsimile ImagesZooming images Erase image optionsPreventing Erasure of Facsimile Images Adding Facsimile Channels FAX-30 top 2. Press the Edit WX FAX Station soft keyEdit facsimile station menu Station options Example stations of northwest pacific Frequency, call sign and station name entry windows Starting receiving Channel setup menuFAX Operation PC Stopping receivingSetting, changing timer receiving schedule Timer program listTimer Program No.2 Timer program menuTurning on/off specific timer programs Facsimile standby display TopPhase Example of phasing signal out of synchronizatio Sync optionsColor Saving images Lock Lock optionsEdit Station List Edit station list menuThis page intentionally left blank Message categories Navtex Operation NavnetAbout Navtex Messages Receiving navtex messagesNavtex message data display Setting Up Navtex Stations, Messages, AlarmsRX setup menu Navtex frequency optionsNavtex station mode options Navtex station optionsNavtex message options Max error rate entry window Alarm SAR MSG optionsAlarm warning msg options Previewing Incoming Navtex Messages Navtex message selection screenNavtex message preview display Displaying Navtex Messages Displaying navtex messagesSample navtex message Remarks on navtex messages Displaying the Navtex Station List Nav areas for 490 kHz navtex stationsKHz stations of nav area Edit navtex station menu Adding Navtex StationsEdit station menu Nav area selection windowStation name entry window Station ID1 entry windowLatitude entry window Navtex Operation PC Setting Up Navtex Stations, Messages RX SetupNavtex standby display Received messages click to display490kHz Station List Navtex station listEdit station list Editing Navtex Stations CullercoatsDeleting Navtex Stations This page intentionally left blank Maintenance points MAINTENANCE, TroubleshootingMaintenance Check Point ActionTroubleshooting Replacement of FuseTroubleshooting Trouble Problem RemedyDiagnostics NavNet System setup menuFAX-30 menu Diagnostics PC Diagnostic test resultsClearing Data NavNet Clear memory menuClear all images options Clearing Data PC Clear memory optionsAll Clear for technicians only FAX-30, cover openedSimulation Mode Accessing the simulation mode through NavNetSimulation setup menu Accessing the simulation mode through PC SIMULATION§ Setup WX FAX §SIMULATION Live Navtex SimulationThis page intentionally left blank Installation Mounting dimensions of facsimile receiver FAX-30Facsimile Receiver Antenna Unit Wire antenna or whip antennaAntenna wiring and preamp status General antenna connectionInstallation of preamp unit FAX-5 option How to mount the preamp unit FAX-5Wiring WiringWire or whip antenna Power cableGround wire Attachment of antenna connectorSupplying Power to the Preamp Unit JIS cable specificationsFAX-30, top view, cover removed Internet Explorer Version Browser, PC SettingsBrowser settings Netscape Navigator VersionPC settings FAX-30IP address Facsimile station map AppendixFacsimile Stations AP-1AP-2 ZoneAP-3 Facsimile station list alphabetical orderAP-4 Navtex StationsNavtex stations map Location of navtex stationsNavtex stations list AP-5AP-6 AP-7 VIIAP-8 XIIAP-9 Menu TreeNavNet menu tree Soft keysAP-10 Menu keyPC Menu tree AP-11Facsimile menu tree AP-12 Navtex menu treeSpecifications of Facsimile Receiver This page is intentionally left blank ＰａｃｋｉｎｇＬｉｓｔ FAX-30-J/E-AP FAX-30-J/E-N Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Index IN-1IN-2 IndexOffered by Busse-Yachtshop.com

Related manuals

Manual 115 pages 15.65 Kb