Sumo SL001 manual Two Player Two-Player Mode

Two Player (Two-Player Mode)

1.To select two-player mode, ensure each robot is set to a cor- responding remote control frequency. For example, select R/C1 to control a robot with the remote set to CHANNEL 1; select R/C2 to control a robot with the remote set to CHANNEL 2.

2.Place the robots in the shaded area of the Doyho, facing . each other.

3.To begin a match, press the START/STOP button on each remote control. Five LEDs on each robot blink to indicate . a countdown sequence.

4.During the match, a player may use all the remote-control commands available to force the opponent from the Dohyo. (See Commands and Maneuvers section.)

5.When a match is completed, the winning robot emits sounds and displays an LED pattern. (See Keeping Score section.)

6.To begin a new match, repeat steps 3 and 4.

7.To start a new game and clear the previous record, press and hold the START/STOP button for two seconds. Red LEDs on each robot flash.

18