Sumo SL001 manual Engage after Accepted

Troubleshooting

Problem	Cause	Solution
Robot is slow, .	• Robot batteries are	• Recharge the robot
erratic or does	exhausted.	with its charger.
not move.	• Remote control batter-	• Replace batteries.
	ies are exhausted.
	• Remote control .	• Switch power to ON
	power switch is in .	position.
	OFF position.
	• Debris (hair, carpet	• Carefully remove
	fibers, dirt, etc.) is	foreign material from
	trapped between the	wheels.
	robot’s wheels.
Robot does not	• Infrared signal not .	• Place robots inside the
engage after	accepted.	Dohyo borderline, facing
START command.		each other.
	• Robot batteries are	• Recharge the robot
	exhausted.	with its charger.
	• Remote control .	• Replace batteries.
	batteries are exhausted.

26