Troubleshooting
Problem | Cause | Solution |
Robot does not | • Infrared signal weak- | • Move away from light |
respond or . | ened by sunlight or | source. |
responds poorly | other bright light |
|
to remote control. | source. |
|
| • Out of operating range. | • Ensure remote is within |
|
| 41⁄2 feet of robot. |
| • Interference with . | • Recalibrate remote |
| infrared signal. | control output. Move |
|
| the remote’s joystick |
|
| in a circular motion |
|
| around its outermost |
|
| perimeter. |
Remote control | • Remote control . | • Set remote to different |
ability is lost. | CHANNEL not set to | CHANNEL. |
| corresponding robot |
|
| play mode. |
|
| • Both remote controls |
|
| set to the same R/C play |
|
| mode. |
|
25