Barcode Reader
6.Pull the barcode through the stand, according to arrow direc- tion, at a slow, steady rate, taking no more than five seconds. The robot operates silently while scanning the code.
7.When the upload is complete, the robot sounds. If a sound is not heard, the upload process was unsuccessful.
8.To restart, switch the robot off, then on. Begin the upload . process again.
9.After successful upload, trigger the new stunts using remote control ACTION buttons 1, 2 and 3, on level 2.
Reset
When using the Stunt Action software, remote control ACTION buttons 1, 2 and 3 are overwritten. To restore these three default stunts, press the RESET ACTIONS button located on the bottom of the robot.
24