Airlink AP431W manual WDS with AP

Page 13

WDS with AP

The WDS mode converts the Access Point to a wireless bridge. It bridges the network clients from physically separate LANs into one virtual LAN and allows wireless clients to connect to the network via the Access Point.

Step 1 Select WDS with AP and enter the MAC address of the remote APs. Click Apply to save the changes.

Step 2 Configure other Access Points in the same way.

Image 13

Contents Quick Installation Guide Getting Started SectionConnecting the Access Point Gathering Information Ssid Network Name Channel Number Wireless Security SettingsUsing Web Configuration Utility Page WEP Wired Equivalent Privacy WPA-PSK WiFi Protected Access-Pre Shared Key Selecting Operating Modes Access PointAP Client AP Repeater WDS Bridge WDS with AP Technical Support Connecting to the Access Point