Airlink AP431W manual Connecting the Access Point

Page 3

Section 2

Connecting the Access Point

Step 1 Connect one end of a network cable to the Network port of the Access Point and connect the other end to one of the LAN ports of the router (See the diagram below).

Step 2 Power on the Access Point by connecting one end of the supplied power adapter to the power jack of the Access Point and connecting the other end to an electrical outlet.

Step 3 Verify that all three lights on the Access Point are lit. If not, verify that all the connections are secure and try again.

Image 3

Contents Quick Installation Guide Getting Started SectionConnecting the Access Point Gathering Information Ssid Network Name Channel Number Wireless Security SettingsUsing Web Configuration Utility Page WEP Wired Equivalent Privacy WPA-PSK WiFi Protected Access-Pre Shared Key Selecting Operating Modes Access PointAP Client AP Repeater WDS Bridge WDS with AP Technical Support Connecting to the Access Point