Airlink AP431W manual Using Web Configuration Utility

Page 5

Section 4

Using Web Configuration Utility

You can use the Access Point’s built-in Web Configuration Utility to configure the encryption settings and operating modes. This section describes how to configure the Access Point’s wireless and security settings. For information on the different operating modes, please refer to Section 5, Selecting Operating Modes.

Step 1 Open your Web Browser (Internet Explorer or Netscape), enter the IP Address of the Access Point (default: 192.168.1.250) in the address bar and press Enter.

Note: If you have changed the IP Address of the Access Point, enter its new IP Address instead of the default.

Step 2 Enter admin for both the User name and Password and click OK.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Quick Installation Guide Getting Started SectionConnecting the Access Point Gathering Information Ssid Network Name Channel Number Wireless Security SettingsUsing Web Configuration Utility Page WEP Wired Equivalent Privacy WPA-PSK WiFi Protected Access-Pre Shared Key Selecting Operating Modes Access PointAP Client AP Repeater WDS Bridge WDS with AP Technical Support Connecting to the Access Point
Top Page Image Contents