Airlink AP431W manual AP Repeater

Page 11

AP Repeater

The AP Repeater mode converts the Access Point to a wireless repeater. By extending the wireless signal of the source AP/wireless router, the wireless coverage is expanded.

Step 1 Select AP Repeater and enter the MAC address or use the Scan button to search for the remote AP (source AP/wireless router). Click Apply to save the changes

Step 2 Once the Repeater has restarted, you may disconnect it from the wireless router. For best result, place the Repeater at a central location between the wireless router and your wireless computers.

Note: The repeater mode may not be compatible with all routers due to the lack of a standard protocol for repeater mode.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Quick Installation Guide Getting Started SectionConnecting the Access Point Gathering Information Ssid Network Name Channel Number Wireless Security SettingsUsing Web Configuration Utility Page WEP Wired Equivalent Privacy WPA-PSK WiFi Protected Access-Pre Shared Key Selecting Operating Modes Access PointAP Client AP Repeater WDS Bridge WDS with AP Technical Support Connecting to the Access Point
Top Page Image Contents