Airlink AWLL6080 user manual

Page 35

Go to your routers configuration screen and click on Wireless. Then click Wireless security. Make sure that the Wi-Fi Protected Setup Enable box is checked. Then click the Add Wireless Device Wizard button.

If you are using Pin Code method, enter the Pin Code in the Pin Number box and click connect. If you are using Push Button method, click on Virtual Push Button OR the physical push button on the router.

Image 35

Contents 300N Draft 802.11n Wireless USB Adapter Table of Contents Introduction Package ContentsFeatures Install Driver & Utility InstallationPage Page Page Page Select Install the software automatically and click Next Page Click Finish Verify Driver Installation Page Configuring the Adapter Page Page Page Page Wireless Information Wireless MonitorAP List Profile Settings Page Click on Profile Settings then New Configuring EncryptionPage Configuring WEP encryption Select WPA/WPA2-PSK from the Set Security Option box Configuring WPA/WPA2-PSK Encryption for home usersSelect WPA/WPA2 from the Set Security Option box Configuring WPA/WPA2 Encryption for corporate networksSelect 802.1x from the Set Security Option box Configuring 802.1x authentication for corporate networksAd-hoc and Peer-to-Peer Wireless Networks Open the Wireless Monitor Page Wi-Fi Protected Setup WPS Page Page Page Page Click Continue on the router configuration screen About Appendix a Specifications Federal Communication Commission Interference Statement Appendix B InformationEuropean Union Notice Mailsupport@airlink101.com Technical Support