Connection
Chapter 2
Chapter 2: Connection
Overview
This chapter gives instructions on how to connect the Power Over Ethernet Kit. Once connected, the Kit will transmit data and power over the Ethernet network cable to your remotely located network device.
The diagram shows an example of how the Kit can be connected to a wired switch and a wireless access point.
|
|
| Power Adapter | |
|
|
| (24V typical) | |
|
|
| Power Cable | |
|
|
| Power Over Ethernet | |
| Cable |
| Ethernet Cable | |
Network |
| Injector | ||
| Ethernet |
|
|
|
Workgroup |
|
|
|
|
Switch |
|
|
|
|
|
|
|
| Up to 328 feet |
|
|
|
| |
|
|
|
| (100 m) |
|
| |||
Power Cable
Splitter | Cable |
| Ethernet |
Wireless |
|
Access Point |
|
To connect the Kit to a device with a conventional power port, proceed to the section, “Power on a Device that Uses a Standard Power Adapter.” To connect the Injector to a device that supports inline power, proceed to the section, “Power on a Device that Uses Inline Power.”
Power Over Ethernet Adapter Kit | |