Linksys USB100TX manual Starting Over in Windows

Linksys EtherFast® Series

Starting Over in Windows 2000

1.Click the Start button, choose Settings, choose Control Panel, then dou- ble-click the System icon. The System Properties window will open.

2.Choose the Hardware tab.

3.Click the Device Manager button. The Device Manager window will open.

4.Click the plus sign (+) beside Network Adapters. The Linksys EtherFast 10/100 USB Network Adapter listing should appear.

10/100 USB Network Adapter

5.Right-click on Linksys EtherFast 10/100 USB Network Adapter. A context menu should open (see the example below).

6.First, choose Disable.

7.When asked if you want to disable the device, click Yes.

8.Right-click on the Linksys EtherFast 10/100 USB Network Adapter again. This time, select Uninstall.... Click OK.

9.The Network Adapters category should no longer be listed.

10.Click the OK button, and restart your computer. Go to the Windows 2000 Installation & Setup section to install the Windows 2000 drivers.

41 42