Linksys WUSB11 manual Removing the Wireless USB Network Adapter

Instant WirelessTM Series

Removing the Wireless USB Network Adapter

The adapter is Hot Swappable, which means that you can remove or reconnect the adapter whenever you want without turning off your PC. Although, you might need to renew your network connection

Note: If you have multiple USB ports on your PC, make sure to reconnect the adapter into the same port that it was removed; other- wise, the adapter will be detected as a new device.

Using the Wireless USB Network Adapter’s Wall Mount

The Wireless USB Network Adapter’s Wall Mount allows you to easily install the Wireless USB Network Adapter onto your wall for convenient use and bet- ter reception.

Before installing		the Wall
Mount into the Wireless USB
Network	Adapter,	take	the
separate	adhesive	strip	of
velcro and attach it to the
wall where you will be
mounting the Wireless USB
Network Adapter.
The Wall Mount, shown in				Figure 5-3
Figure 5-3, is included with
the Wireless USB Network
Adapter.
To install it into the Wireless
USB Network Adapter,			sim-

ply slide it into the Adapter’s back, as shown in steps one, two, and three.

STEP ONE

Figure 5-4

Wireless USB Network Adapter

STEP TWO

Figure 5-5

STEP THREE

Figure 5-6

Once the Wall Mount is attached to the Wireless USB Network Adapter, stick it to the velcro strip you’ve attached to your wall for wall mounting.

13 14