Power | Linksys WUSB11 instruction

Instant WirelessTM Series

Note: Windows 95 and NT do not support the USB Adapter.

	Figure 3-2
The LED Indicators
Power	Green. The Power LED lights up when the Wireless USB
	Network Adapter is powered on.
Link	Green. The Link LED lights up when the Adapter has an
	active connection. If the LED is not on, the Adapter is not
	interfacing with the network.

Wireless USB Network Adapter

Chapter 4: Installation and Configuration of the USB Adapter for Windows 98SE, Me, and 2000

This Wireless USB Network Adapter Setup Wizard will guide you through the Install and Uninstall Procedures for Windows 98SE, Me, and 2000.

Important for Windows XP users: Do NOT run the Wireless Network Adapter Setup Wizard. Proceed directly to Chapter 5: Connecting Your Wireless USB Network Adapter.

Note to Windows 98, Me, and 2000 users: You must install this software before installation of the hardware.

Insert the Setup Wizard CD into your CD-ROM Drive. The Setup Wizard should run automatically and Figure 4-1 should appear. If it does not, click the Start button and choose Run. In the box that appears, enter D:\setup.exe (where “D” is the letter of your CD-ROM drive).

Figure 4-1