Instant WirelessTM Series
9. The | InstallShield | |
Wizard | will | begin |
copying the files. The | ||
bar in the middle of the | ||
screen below shows the | ||
percentage of | files | |
copied. |
|
|
Figure
10.The screen in Figure 4- 10 may appear. Click on the Yes button if you want to continue the installation. Click on the No button if you do not want to continue the installation.
11.After the Wireless USB Network Adapter Setup
Wizard | has been | suc- | Figure |
cessfully | installed, | the |
|
screen in Figure |
| ||
will appear. |
|
|
You have now completed the installation of your Wireless USB Network Adapter Setup Wizard. To connect the Wireless USB Network Adapter, please go to Chapter 5: Connecting Your Wireless USB
Network Adapter.
Figure
Wireless USB Network Adapter
Chapter 5: Connecting Your Wireless USB Network Adapter
Important for Windows 98SE, Me, and 2000 users: You must install the Adapter’s software before installation of the hardware.
Important for Windows XP users: You must install the Adapter’s hardware before installation of the software.
To install your Wireless USB Network Adapter, first connect one end of the USB cable to the Adapter. Then, connect the other end of the USB cable to the USB port on your desktop or notebook PC. Since the Adapter gets its power from the PC’s USB port, there is no external power adapter. The Power LED should light up green when the Adapter is attached and the PC is on.
The USB Icon
The USB icon shown below marks a USB port on a PC or device.
Figure
USB Cabling
The Wireless USB Network Adapter comes with one USB cable. Connect one end of the USB cable to the USB device on your USB Network Adapter. Connect the other end to a computer’s USB port.
The picture shows two USB ports as they might appear on your computer. Note the two USB icons marking the ports.
Figure
11 | 12 |