Linksys WPC55AG manual

Page 24

Roaming - In an infrastructure mode wireless network, this refers to the abili- ty to move out of one access point's range and into another and transparently reassociate and reauthenticate to the new access point. This reassociation and reauthentication should occur without user intervention and ideally without interruption to network connectivity. A typical scenario would be a location with multiple access points, where users can physically relocate from one area to another and easily maintain connectivity.

RTS (Request To Send) - An RS-232 signal sent from the transmitting station to the receiving station requesting permission to transmit.

Server - Any computer whose function in a network is to provide user access to files, printing, communications, and other services.

Software - Instructions for the computer. A series of instructions that performs a particular task is called a “program.” The two major categories of software are “system software” and “application software.” System software is made up of control programs such as the operating system and database management sys- tem (DBMS). Application software is any program that processes data for the user.

A common misconception is that software is data. It is not. Software tells the hardware how to process the data.

Spread Spectrum - Spread Spectrum technology is a wideband radio frequen- cy technique developed by the military for use in reliable, secure, mission-crit- ical communications systems. It is designed to trade off bandwidth efficiency for reliability, integrity, and security. In other words, more bandwidth is con- sumed than in the case of narrowband transmission, but the trade off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives, Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS).

SSID (Service Set IDentifier) - A unique name shared among all points in a wireless network. The SSID must be identical for each point in the wireless net- work and is case-sensitive.

Subnet Mask - The method used for splitting IP networks into a series of sub- groups, or subnets. The mask is a binary pattern that is matched up with the IP address to turn part of the host ID address field into a field for subnets.

TCP (Transmission Control Protocol) - A method (protocol) used along with the IP (Internet Protocol) to send data in the form of message units (datagram) between network devices over a LAN or WAN. While IP takes care of handling the actual delivery of the data (routing), TCP takes care of keeping track of the individual units of data (called packets) that a message is divided into for effi- cient delivery over the network. TCP is known as a “connection oriented” pro- tocol due to requiring the receiver of a packet to return an acknowledgment of receipt to the sender of the packet resulting in transmission control.

TCP/IP (Transmission Control Protocol/Internet Protocol) - The basic com- munication language or set of protocols for communications over a network (developed specifically for the Internet). TCP/IP defines a suite or group of protocols and not only TCP and IP.

Topology - A network’s topology is a logical characterization of how the devices on the network are connected and the distances between them. The most common network devices include hubs, switches, routers, and gateways. Most large networks contain several levels of interconnection, the most impor- tant of which include edge connections, backbone connections, and wide-area connections.

WAN (Wide Area Network)- A communications network that covers a rela- tively large geographic area, consisting of two or more LANs. Broadband com- munication over the WAN is often through public networks such as the tele- phone (DSL) or cable systems, or through leased lines or satellites. In its most basic definition, the Internet could be considered a WAN.

WEP (Wired Equivalent Privacy) - A data privacy mechanism based on a 64- bit or 128-bit shared key algorithm, as described in the IEEE 802.11 standard.

WLAN (Wireless Local Area Network) - A group of computers and associat- ed devices that communicate with each other wirelessly.

40

41

Image 24
Contents Dual-Band Wireless A+G Copyright & Trademarks Table of Contents Common Problems and Solutions Frequently Asked Questions Dual-Band Wireless A+G Notebook AdapterFeatures IntroductionPlanning Your Wireless Network Ad-Hoc versus Infrastructure ModeNetwork Topology Dual-Band Wireless A+G Notebook Adapter’s LEDs Hardware InstallationOverview Driver Installation for Windows XP Windows XP Wireless Zero ConfigurationInstallation and Configuration for Windows 98, Me, Software Installation for Windows 98, Me,\setup.exe where D is the letter of your CD-ROM drive Page Proceed to the next section, Hardware Installation ModeUsing the Wlan Monitor for Windows 98, Me, Starting the Wlan MonitorWireless Network Status TCP/IP SettingLink Information Site Survey Site InformationProfiles Profile InformationCreating a New Profile Page Mixed Mode Select G-Only ModeLeap Authentication Appendix a Troubleshooting Common Problems and SolutionsFrequently Asked Questions What Ieee 802.11b features are supported? Appendix B Glossary Page Page Page Appendix C Specifications EnvironmentalAppendix D Warranty Information Appendix E Contact InformationSales Information Web FTP SiteCopyright 2003 Cisco Systems, Inc. All Rights Reserved

WPC55AG specifications

The Linksys WPC55AG is a versatile and robust wireless adapter designed to enhance connectivity for laptops and desktop computers. This device stands out with its combination of dual-band connectivity, supporting both 2.4GHz and 5GHz frequencies, making it an excellent choice for users looking to achieve faster speeds and reduced interference. The capability to operate on two different frequencies allows for flexibility in network environments, catering to the varying needs of users.

One of the main features of the WPC55AG is its support for both 802.11g and 802.11a wireless standards, which means it can connect to a wide range of access points and routers. The device can provide wireless speeds up to 54Mbps on the 802.11g band and even higher when operating on the 802.11a band. This ensures a reliable connection for various applications such as video streaming, online gaming, and large file transfers.

The WPC55AG also incorporates advanced security protocols, including Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), and WPA2. These security features help to safeguard users' networks from unauthorized access, ensuring a secure browsing experience whether at home or in public environments.

Installation of the Linksys WPC55AG is straightforward, thanks to its user-friendly setup wizard. The card is compatible with a variety of operating systems, including Windows and Mac OS, ensuring that a wide range of users can benefit from its capabilities. With its PCI card form factor, this wireless adapter can easily be installed in most computers, providing a stable connection that surpasses that of many built-in wireless solutions.

In addition to its impressive technical features, the Linksys WPC55AG is notable for its durability and reliability. Designed for long-term use, this adapter boasts a sleek design that complements modern computing setups while maintaining functionality. With ongoing updates and support from Linksys, users can ensure that their devices operate at peak performance.

In conclusion, the Linksys WPC55AG is an excellent choice for individuals looking to enhance their wireless connectivity. Its dual-band capabilities, extensive range of compatible standards, robust security features, and ease of installation make it a go-to option for both casual users and gaming enthusiasts alike. Whether at home or on-the-go, this wireless adapter provides the performance and reliability that users demand.