Linksys WPC55AG manual Mode, Proceed to the next section, Hardware Installation

6.If you chose Infrastructure Mode, go to Step 7 now. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Setting screen will appear for the type of network you’re using (see Figures 5-5 and 5-6).

Note: If you chose 5GHz + 2.4GHz in Step 4 for connection to both 802.11a and 54g networks, then go to Step 6. The Adapter will auto- matically select the best channel for you.

For	the	Channel			setting,
the	channel you				choose
should match the channel
set on the other devices in
your	wireless			network.
Select the			channel			you
plan to use for your
802.11a		or	54g		network
from the appropriate drop-
down screen that appears.
If you want the network to
automatically				choose a
channel		for		you,		then	Figure 5-5
select Auto.
The Network Mode setting
is available only for 54g
networks.			If	you		have
Wireless-G					(draft
802.11g) and Wireless-B
(802.11b) devices in your
network,		then		keep		the
default Network Mode set-
ting, Mixed Mode. If you
have only Wireless-G
devices, select G-Only
Mode.

Figure 5-6

Click the Next button.

7. Review	your
settings	on the
F i n a l i z e
Settings	screen,

shown in Figure 5-7, before the Setup Wizard starts to copy your files. Click the Next button to continue.

Figure 5-7

8.After the files have been successfully copied, the screen in Figure 5-8 will appear. Click the Exit button.

Figure 5-8

Proceed to the next section, “Hardware Installation.”

12 13