Linksys WPS54GU2 manual Configuring the PrintServer Using the Web-based Utility, Setup Tab

Page 25

Wireless-G PrintServer for USB 2.0

Chapter 6: Configuring the PrintServer Using the Web-based Utility

Overview

After setting up the PrintServer with the Setup Wizard, the PrintServer will be ready for use. However, if you’d like to change its advanced settings, use the PrintServer’s web-based utility. This chapter will describe each web page of the utility and each page’s key functions. The utility can be accessed via your web browser through the use of a networked computer.

There are six main tabs: Setup, Protocol, Wireless, Printer, Status, and Exit. Additional tabs will be available after you click one of the main tabs.

To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the PrintServer’s IP address in the Address field. Then press Enter.

NOTE: Use the PrintServer’s IP address that you noted when you ran the Setup Wizard. Otherwise, insert the Setup CD-ROM, and when the Welcome screen appears, click Setup Wizard. Follow the instructions until you reach the Wireless-G PrintServer Setup screen. Note the IP address, and then click Back until you reach the Welcome screen. Click Exit.

You will be asked to enter a User name and Password (see Figure 6-1). Leave the User name field blank, and

 

enter admin in the Password field. Then click the OK button.

Figure 6-1: Password to Access Web-based Utility

 

The Setup Tab

 

The first screen that appears is the Setup tab and allows you to change the PrintServer’s general settings.

 

Device Name. Enter the PrintServer’s name in the field provided. The name is located on a sticker on the bottom

 

of the PrintServer.

 

Password. To change the PrintServer’s password, enter the current password in the Current Password field.

 

Enter the new password in the New Password field, and then enter the new password again in the Verify

 

Password field.

 

Protocols. Check the box(es) for AppleTalk or NetBEUI, if they are used by your network.

 

Click the Save button to apply your changes, or click Cancel to cancel your changes.

Figure 6-2: Setup

Chapter 6: Configuring the PrintServer Using the Web-based Utility

18

Overview

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 802 GHz .11g Wireless- G Copyright and Trademarks How to Use this User GuideTable of Contents Appendix B Wireless Security Appendix a TroubleshootingInternet Printing Protocol IPP PrintServer’s Back Panel List of FiguresPrinter Internet Printing Output Select Welcome IntroductionWhat’s in this Guide? Introduction What’s in this Guide? Getting to Know the PrintServer USB Connector-Type a USB Connector-Type BBack Panel Front Panel Orange when there is a problem with the USB printerPrintServer’s LEDs are located on the front panel StatusConnecting the PrintServer to Your Network Connecting the PrintServerOverview Welcome InstallationClick Back to return to the previous screen PasswordIP Settings Click the Next button to continue Wireless SettingsWireless Security Settings Wireless Security Settings WEP Key 11 Congratulations Windows Driver Installation Driver Setup Welcome Select Program Folder Information Starting the Print Driver UtilityConfigure Printer Port Setup Tab Configuring the PrintServer Using the Web-based UtilityEnter admin in the Password field. Then click the OK button Protocol Tab AppleTalk Protocol Tab TCP/IPProtocol Tab NetBEUI Protocol Tab NetBEUIProtocol Tab Snmp Protocol Tab SnmpWireless Tab Basic Wireless Tab BasicWireless Tab Security Wireless Tab SecurityPrinter Internet Printing Printer Tab Internet Printing10 Printer Logical Port Printer Tab Logical PortStatus Tab Printer Status Tab DeviceExit Tab Status Tab WirelessBi-Admin Installation Bi-Admin ManagementBi-Admin Installation Connected Protocol Starting the Bi-Admin Management UtilityMenu Options Bi-Admin Management Utility10 Printer Status Verify Password11 Verify Password TCP/IP Figure 13 Configuration TCP/IPApple Talk Figure 14 Configuration AppleTalkNetBEUI Figure 15 Configuration NetBEUIInternet Printing Figure 16 Configuration Internet PrintingPort Figure 17 Configuration Port18 Configuration Wireless 19 Configuration Snmp 20 Upgrade Installing using setup.exe Windows IPP Client SetupIPP Client Configuration for Windows 98, Me, 2000, and XP Internet Printing Protocol IPPOutput Select Enter the IP Address or URL of the IPP ServerIPP Client Setup for Windows 2000 and XP Changing the IPP Port SettingsPort 1 ipaddress631/ipp/P1 Connect to Printer Using IPP PrintersCommon Problems and Solutions Appendix a TroubleshootingNeed to upgrade the firmware Brief Overview Appendix B Wireless SecurityWhat Are The Risks? Jamming Attacks Passive AttacksActive Attacks Maximizing Wireless SecurityDictionary-Building or Table Attacks Man-in-the-Middle AttacksWireless-G PrintServer for USB Ssid Wireless-G PrintServer for USB Click the Save button to apply your changes WEP EncryptionAppendix C About Bi-Directional Printing Appendix D Upgrading Firmware Figure D-1 Upgrade FirmwareShared Resources Appendix E Windows HelpNetwork Neighborhood/My Network Places Appendix F Glossary Wireless-G PrintServer for USB Wireless-G PrintServer for USB Wireless-G PrintServer for USB Wireless-G PrintServer for USB Wireless-G PrintServer for USB Model Appendix G SpecificationsStandards 10% to 85%, Non-CondensingLimited Warranty Appendix H Warranty InformationFCC Statement Appendix I Regulatory InformationIndustry Canada Canada Wireless-G PrintServer for USB Linksys Chapter J Contact Information
Related manuals
Manual 2 pages 6.21 Kb

WPS54GU2 specifications

The Linksys WPS54GU2 is a reliable and efficient wireless print server designed to simplify the process of sharing printers across a local network. This device enables users to connect a USB printer to an existing wireless network, allowing multiple computers to access the printer without the need for direct connections. As part of Linksys' commitment to providing practical networking solutions, the WPS54GU2 has been tailored to meet the needs of home and small office users.

One of the standout features of the WPS54GU2 is its support for the IEEE 802.11b/g wireless standards. This ensures compatibility with a wide range of network devices, and users can expect data transfer speeds of up to 54 Mbps, making it suitable for everyday printing tasks. Its wireless capability eliminates the hassle of tangled cables and allows for flexible printer placement within the workspace.

The WPS54GU2 supports multiple operating systems, including Windows and Mac OS, broadening its accessibility. The intuitive setup process is another highlight, facilitated by a user-friendly web-based interface. The inclusion of Quick Setup Wizard ensures even novice users can configure their device with ease. By following the simple prompts, users can seamlessly connect their printer to the network and begin printing in no time.

Certainly, security is a crucial consideration in today’s networking environment, and the Linksys WPS54GU2 includes robust security features. It supports WEP, WPA, and WPA2 encryption standards, helping to protect data transmitted over the network. Additionally, the device allows for the configuration of various security modes to match the specific needs of a home or office environment.

Moreover, an interesting characteristic of the WPS54GU2 is its ability to support both USB 1.1 and USB 2.0 printers, enhancing its compatibility with various printer models. The ability to connect multiple computers to a single printer not only improves efficiency but also optimizes resource use.

In summary, the Linksys WPS54GU2 serves as a versatile wireless print server, offering ease of use, compatibility, and strong security features. By enabling users to connect and share printers over a wireless network, it enhances the functionality of workspaces, making it a valuable addition to any home or small office setup.
Top Page Image Contents