Linksys WPS54GU2 manual Protocol Tab Snmp

Page 28

Wireless-G PrintServer for USB 2.0

The Protocol Tab - SNMP

Use the screen shown in Figure 6-6 to view or change the PrintServer’s SNMP (Simple Network Management

Protocol) settings.

The PrintServer supports SNMP, which allows network administrators to monitor and control the PrintServer through the use of network management platforms, such as HP OpenView.

The appropriate MIB file must be imported into your SNMP management program using the Import-Compile command. Check your program’s documentation for details on this procedure. The MIB file is named Mib2p.mib and is provided in the MiB folder on the Setup CD-ROM.

General. Enter the name of the contact person in the SysContact field. Enter the location of the contact person in the SysLocation field.

Management Stations. Select the number of the management station from the Station No. drop-down menu (1-

 

4). Click the Get Data button to display the information for the selected station.

Figure 6-6: Protocol Tab - SNMP

In the IP Address fields, enter the IP address of the management station with the SNMP program installed. In the

 

Community field, enter the name of the SNMP community, which is usually public or private. From the Access

 

drop-down menu, select the desired level of access for this management station, Not Accessible, Read-only, or

 

Read/Write.

 

Trap Receivers. Select the number of the trap receiver from the Receiver No. drop-down menu (1-4). Click the

 

Get Data button to display the information for the selected trap receiver.

 

In the IP Address fields, enter the IP address of the trap receiver that will be sent the trap messages or

 

notifications. In the Community field, enter the name of the SNMP community, which is usually public or private.

 

To designate a severity level, click the checkbox next to Enable with Severity level. From the following drop-down

 

menu, select the desired level of severity, with 1 meaning least severe.

 

Click the Save button to apply your changes, or click Cancel to cancel your changes.

 

Chapter 6: Configuring the PrintServer Using the Web-based Utility

21

The Protocol Tab - SNMP

Page 27 Page 29
Image 28
Page 27 Page 29
Contents 802 GHz .11g Wireless- G How to Use this User Guide Copyright and TrademarksTable of Contents Appendix B Wireless Security Appendix a TroubleshootingInternet Printing Protocol IPP List of Figures PrintServer’s Back PanelPrinter Internet Printing Output Select Welcome IntroductionWhat’s in this Guide? Introduction What’s in this Guide? Getting to Know the PrintServer USB Connector-Type a USB Connector-Type BBack Panel Orange when there is a problem with the USB printer Front PanelPrintServer’s LEDs are located on the front panel StatusConnecting the PrintServer to Your Network Connecting the PrintServerOverview Installation WelcomePassword Click Back to return to the previous screenIP Settings Wireless Settings Click the Next button to continueWireless Security Settings Wireless Security Settings WEP Key 11 Congratulations Windows Driver Installation Driver Setup Welcome Select Program Folder Starting the Print Driver Utility InformationConfigure Printer Port Setup Tab Configuring the PrintServer Using the Web-based UtilityEnter admin in the Password field. Then click the OK button Protocol Tab TCP/IP Protocol Tab AppleTalkProtocol Tab NetBEUI Protocol Tab NetBEUIProtocol Tab Snmp Protocol Tab SnmpWireless Tab Basic Wireless Tab BasicWireless Tab Security Wireless Tab SecurityPrinter Tab Internet Printing Printer Internet PrintingPrinter Tab Logical Port 10 Printer Logical PortStatus Tab Device Status Tab PrinterStatus Tab Wireless Exit TabBi-Admin Management Bi-Admin InstallationBi-Admin Installation Starting the Bi-Admin Management Utility Connected ProtocolBi-Admin Management Utility Menu OptionsVerify Password 10 Printer Status11 Verify Password 13 Configuration TCP/IP TCP/IP Figure14 Configuration AppleTalk Apple Talk Figure15 Configuration NetBEUI NetBEUI Figure16 Configuration Internet Printing Internet Printing Figure17 Configuration Port Port Figure18 Configuration Wireless 19 Configuration Snmp 20 Upgrade Windows IPP Client Setup Installing using setup.exeIPP Client Configuration for Windows 98, Me, 2000, and XP Internet Printing Protocol IPPEnter the IP Address or URL of the IPP Server Output SelectIPP Client Setup for Windows 2000 and XP Changing the IPP Port SettingsPort 1 ipaddress631/ipp/P1 Using IPP Printers Connect to PrinterAppendix a Troubleshooting Common Problems and SolutionsNeed to upgrade the firmware Brief Overview Appendix B Wireless SecurityWhat Are The Risks? Passive Attacks Jamming AttacksMaximizing Wireless Security Active AttacksDictionary-Building or Table Attacks Man-in-the-Middle AttacksWireless-G PrintServer for USB Ssid Wireless-G PrintServer for USB WEP Encryption Click the Save button to apply your changesAppendix C About Bi-Directional Printing Figure D-1 Upgrade Firmware Appendix D Upgrading FirmwareShared Resources Appendix E Windows HelpNetwork Neighborhood/My Network Places Appendix F Glossary Wireless-G PrintServer for USB Wireless-G PrintServer for USB Wireless-G PrintServer for USB Wireless-G PrintServer for USB Wireless-G PrintServer for USB Appendix G Specifications ModelStandards 10% to 85%, Non-CondensingAppendix H Warranty Information Limited WarrantyAppendix I Regulatory Information FCC StatementIndustry Canada Canada Wireless-G PrintServer for USB Chapter J Contact Information Linksys
Related manuals
Manual 2 pages 6.21 Kb

WPS54GU2 specifications

The Linksys WPS54GU2 is a reliable and efficient wireless print server designed to simplify the process of sharing printers across a local network. This device enables users to connect a USB printer to an existing wireless network, allowing multiple computers to access the printer without the need for direct connections. As part of Linksys' commitment to providing practical networking solutions, the WPS54GU2 has been tailored to meet the needs of home and small office users.

One of the standout features of the WPS54GU2 is its support for the IEEE 802.11b/g wireless standards. This ensures compatibility with a wide range of network devices, and users can expect data transfer speeds of up to 54 Mbps, making it suitable for everyday printing tasks. Its wireless capability eliminates the hassle of tangled cables and allows for flexible printer placement within the workspace.

The WPS54GU2 supports multiple operating systems, including Windows and Mac OS, broadening its accessibility. The intuitive setup process is another highlight, facilitated by a user-friendly web-based interface. The inclusion of Quick Setup Wizard ensures even novice users can configure their device with ease. By following the simple prompts, users can seamlessly connect their printer to the network and begin printing in no time.

Certainly, security is a crucial consideration in today’s networking environment, and the Linksys WPS54GU2 includes robust security features. It supports WEP, WPA, and WPA2 encryption standards, helping to protect data transmitted over the network. Additionally, the device allows for the configuration of various security modes to match the specific needs of a home or office environment.

Moreover, an interesting characteristic of the WPS54GU2 is its ability to support both USB 1.1 and USB 2.0 printers, enhancing its compatibility with various printer models. The ability to connect multiple computers to a single printer not only improves efficiency but also optimizes resource use.

In summary, the Linksys WPS54GU2 serves as a versatile wireless print server, offering ease of use, compatibility, and strong security features. By enabling users to connect and share printers over a wireless network, it enhances the functionality of workspaces, making it a valuable addition to any home or small office setup.
Top Page Image Contents