Linksys WPS54GU2 manual Upgrade

Page 48

Wireless-G PrintServer for USB 2.0

•Upgrade. You may use this option to upgrade the firmware of the PrintServer. Follow these instructions:

1 On the Upgrade screen shown in Figure 8-20, click the Files button.

2 The Detected LAN Cards screen will appear, as shown in Figure 8-21. Select the LAN card the PrintServer is connected to, and then click the OK button.

3 Follow the on-screen instructions, and select the firmware file you want to use.

4 View the BIN File Information screen (see Figure 8-22), and click the OK button if you have selected the correct firmware file. Click the Cancel button to select a different firmware file.

5 On the Upgrade screen, click the Upgrade button. Click the Cancel button to cancel the firmware upgrade. For more information, click the Help button.

•Refresh. This option allows you to refresh the device list after you change the name or IP address of a device. The screen does not refresh automatically.

•Exit. This option allows you to exit the Bi-Admin program.

InitDevice. The available options are Reset Device, Restore to Factory Default, Attached Remote, and Connected Protocol.

If you click Attached Remote, the screen in Figure 8-23 appears. To add a cross segment print server, enter its IP address in the fields provided, and click the Set button.

Click Cancel to undo any changes. For more information, click the Help button.

Diagnostic. Diagnostic allows you to print a test page from either of the PrintServer’s ports.

Help. The two options are Help Topics and About Bi-Admin. These help files offer extensive advice and details about all of the PrintServer’s functions and capabilities.

Chapter 8: Bi-Admin Management

Figure 7-20: Upgrade

Figure 7-21: Detected LAN Cards

Figure 7-22: BIN File Information

Figure 7-23: Add Cross Segment PrintServer

41

The Bi-Admin Management Utility

Page 47 Page 49
Image 48
Page 47 Page 49
Contents 802 GHz .11g Wireless- G How to Use this User Guide Copyright and TrademarksTable of Contents Appendix a Troubleshooting Appendix B Wireless SecurityInternet Printing Protocol IPP List of Figures PrintServer’s Back PanelPrinter Internet Printing Output Select Introduction WelcomeWhat’s in this Guide? Introduction What’s in this Guide? USB Connector-Type a USB Connector-Type B Getting to Know the PrintServerBack Panel Orange when there is a problem with the USB printer Front PanelPrintServer’s LEDs are located on the front panel StatusConnecting the PrintServer Connecting the PrintServer to Your NetworkOverview Installation WelcomePassword Click Back to return to the previous screenIP Settings Wireless Settings Click the Next button to continueWireless Security Settings Wireless Security Settings WEP Key 11 Congratulations Windows Driver Installation Driver Setup Welcome Select Program Folder Starting the Print Driver Utility InformationConfigure Printer Port Configuring the PrintServer Using the Web-based Utility Setup TabEnter admin in the Password field. Then click the OK button Protocol Tab TCP/IP Protocol Tab AppleTalkProtocol Tab NetBEUI Protocol Tab NetBEUIProtocol Tab Snmp Protocol Tab SnmpWireless Tab Basic Wireless Tab BasicWireless Tab Security Wireless Tab SecurityPrinter Tab Internet Printing Printer Internet PrintingPrinter Tab Logical Port 10 Printer Logical PortStatus Tab Device Status Tab PrinterStatus Tab Wireless Exit TabBi-Admin Management Bi-Admin InstallationBi-Admin Installation Starting the Bi-Admin Management Utility Connected ProtocolBi-Admin Management Utility Menu OptionsVerify Password 10 Printer Status11 Verify Password 13 Configuration TCP/IP TCP/IP Figure14 Configuration AppleTalk Apple Talk Figure15 Configuration NetBEUI NetBEUI Figure16 Configuration Internet Printing Internet Printing Figure17 Configuration Port Port Figure18 Configuration Wireless 19 Configuration Snmp 20 Upgrade Windows IPP Client Setup Installing using setup.exeIPP Client Configuration for Windows 98, Me, 2000, and XP Internet Printing Protocol IPPEnter the IP Address or URL of the IPP Server Output SelectChanging the IPP Port Settings IPP Client Setup for Windows 2000 and XPPort 1 ipaddress631/ipp/P1 Using IPP Printers Connect to PrinterAppendix a Troubleshooting Common Problems and SolutionsNeed to upgrade the firmware Appendix B Wireless Security Brief OverviewWhat Are The Risks? Passive Attacks Jamming AttacksMaximizing Wireless Security Active AttacksDictionary-Building or Table Attacks Man-in-the-Middle AttacksWireless-G PrintServer for USB Ssid Wireless-G PrintServer for USB WEP Encryption Click the Save button to apply your changesAppendix C About Bi-Directional Printing Figure D-1 Upgrade Firmware Appendix D Upgrading FirmwareAppendix E Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix F Glossary Wireless-G PrintServer for USB Wireless-G PrintServer for USB Wireless-G PrintServer for USB Wireless-G PrintServer for USB Wireless-G PrintServer for USB Appendix G Specifications ModelStandards 10% to 85%, Non-CondensingAppendix H Warranty Information Limited WarrantyAppendix I Regulatory Information FCC StatementIndustry Canada Canada Wireless-G PrintServer for USB Chapter J Contact Information Linksys
Related manuals
Manual 2 pages 6.21 Kb

WPS54GU2 specifications

The Linksys WPS54GU2 is a reliable and efficient wireless print server designed to simplify the process of sharing printers across a local network. This device enables users to connect a USB printer to an existing wireless network, allowing multiple computers to access the printer without the need for direct connections. As part of Linksys' commitment to providing practical networking solutions, the WPS54GU2 has been tailored to meet the needs of home and small office users.

One of the standout features of the WPS54GU2 is its support for the IEEE 802.11b/g wireless standards. This ensures compatibility with a wide range of network devices, and users can expect data transfer speeds of up to 54 Mbps, making it suitable for everyday printing tasks. Its wireless capability eliminates the hassle of tangled cables and allows for flexible printer placement within the workspace.

The WPS54GU2 supports multiple operating systems, including Windows and Mac OS, broadening its accessibility. The intuitive setup process is another highlight, facilitated by a user-friendly web-based interface. The inclusion of Quick Setup Wizard ensures even novice users can configure their device with ease. By following the simple prompts, users can seamlessly connect their printer to the network and begin printing in no time.

Certainly, security is a crucial consideration in today’s networking environment, and the Linksys WPS54GU2 includes robust security features. It supports WEP, WPA, and WPA2 encryption standards, helping to protect data transmitted over the network. Additionally, the device allows for the configuration of various security modes to match the specific needs of a home or office environment.

Moreover, an interesting characteristic of the WPS54GU2 is its ability to support both USB 1.1 and USB 2.0 printers, enhancing its compatibility with various printer models. The ability to connect multiple computers to a single printer not only improves efficiency but also optimizes resource use.

In summary, the Linksys WPS54GU2 serves as a versatile wireless print server, offering ease of use, compatibility, and strong security features. By enabling users to connect and share printers over a wireless network, it enhances the functionality of workspaces, making it a valuable addition to any home or small office setup.
Top Page Image Contents