Setting Up Your Net2Phone Account

Instant BroadbandTM Series

Once your Router is completely installed and set up, you can activate your Net2Phone account. You will need the following before you can set up your Linksys Cable/DSL & Voice Router powered by Net2Phone to place low cost phone calls:

•Calling Card w/ Account # and PIN (included with your Net2Phone Router)

•Phone (to plug into your Net2Phone Router)

•Standard Phone cord (to connect your phone to Net2Phone Router)

Before you can use your FREE minutes, you must activate your account, fol- lowing the directions below.

1.Choose the Setup tab.

2.If you have not already done so, enter the account # that is on the back of your calling card.

3.Enter the PIN that is on the back of your calling card

4.Click Apply.

5.Choose the Help tab. Click on Net2Phone/My Account button. (This will link you to the Linksys/Net2Phone Broadband web page where you can activate your Net2Phone Broadband account.)

6.Follow the instructions in order to activate your account and sign up for service.

7.Once your account is activated follow the directions below for connecting your phone to the Router.

EtherFast® Cable/DSL & Voice Router powered by Net2Phone

Connecting Your Phone to the Linksys Cable/DSL & Voice Router pow- ered by Net2Phone

1. Plug one end of your standard telephone cable into the phone.

2.Plug the other end of the cable into Phone Port on back of Router (see pic- ture)

Placing Phone Calls with Linksys Cable/DSL & Voice Router powered by Net2Phone

1.Pick up the receiver.

2.Dial the number and press #.

You must press # after you dial the number, or the call will not go through.

If you experience any difficulty, refer to the Net2Phone Troublshooting/Frequently Asked Questions section of the manual.

*Any Net2Phone services provided through this Equipment are not intended to replace or be a substitute for primary line voice services or Plain Old Telephone Service ("POTS") and are not meant to provide guaranteed Automatic Number Identification or Automatic Location Information capabilities associated with 911 or E911 services or to permit access to 411 directo- ry assistance services. Net2Phone will not be liable for any damages, expenses, liabilities, risks, or harms arising out of or related to the Net2Phone services provided through this Equipment.

**If you currently have a Net2Phone PC2Phone or Net2Phone Direct account number, it can not be used with this service! You must use the account number printed on the calling card that was enclosed with your Linksys Eterhfast Cable/DSL & Voice Router powered by Net2Phone.