Alcatel-Lucent APX 1000 Software Technical Specifications, Hardware Technical Specifications, Atm

Page 2

APX® 1000 Universal Gateway

Software Technical Specifications

1.Operating System

True Access® Operating System (TAOS) embedded software technology for edge access platforms including Lucent MAX TNT® and APX® family of Universal Gateway and combines multi-platform support with hardware-specific capabilities

2.Protocol Support

WAN/LAN

TCP/IP, UDP/IP, SCTP/IP, TCP Clear, PPP, Sync/Async-PPP, HDLC, GRE

T1: PRI, RBS: Loop-Start, Wink-Start, R1, MF FG-D

E1: PRI, E1 R2 MF (country-specific call progress

tones)

Routing

RIP, RIP2, OSPF, BGP4, IGMP

VPN/tunneling

ATMP, L2TP, IP in IP, L2F, PPTP, Virtual Routers, VLAN tagging

SS7 call control and signaling IPDC, E1/T1 tunneling using IPDC

Fax-over-IP/modem-over-IP

Group III Fax, T.38, Transparent Fax, Transparent Modem

Modem termination/data transfer

V.92: Modem on Hold, QuickConnect, PCM Up-stream V.90, K56Flex, V.34bis, V.34, V.32bis, V.32, V.21* V.22bis, V.22A/B, V.23*, V.44, V.42, V.42bis, V.110, V.120, (PHS) PIAFS, Bell 103*, Bell212A*

* will not automode or dial-out

Administrative

FTP, TFTP, SNTP, DNS

ATM

UNI 3.1, PVC (CBR, VBR)

ISDN

AT&T, Northern Telecom, Q.931 GloBanD, Japan-PRI, VN3-PRI, OneTR6-PRI, Net5-PRI, Danish-PRI, Australia-PRI, National ISDN 2, NFAS with D channel back-up Network and user-side ISDN

3.Bandwidth Management and Data Compression MLPPP, MP/MP+, MPPC, BACP, TCP header compression, ATM traffic shaping, STAC, MS-STAC,STAC-9

4.QoS

RFC 2474 – Differentiated Services Code Point (DSCP) support

RFC 791/1349 type of service (ToS) support

5.Security and Authentication

RADIUS, TACACS/TACACS+, PAP, CHAP, MSCHAP v1+v2, DNIS, CLID, callback, token, local password, call-type pre-authentication

6.Management

SNMPv2, NavisAccess™ System, SSHv1and SSHv2 (requires TAOS 14.0.x) for Telnet, console, COT testing

Hardware Technical Specifications

7.Physical Dimensions

14.8” (D) x 17.2” (W) x 5.20” (H) (3 rack units) 3RU Loaded system weight: 39 lbs. (approximate)

8.Chassis Architecture 6 slots total

1 dedicated slot for system controller module

1 dedicated slot for channel ingress card

4 general purpose slots for port processing, circuit and packet modules

9.Port Density

576 data calls – via Channelized T1

672 data calls – via Channelized T3

720 data calls – via Channelized E1

10.Serviceability/Redundancy

Packet, circuit and processing modules hot-swappable All modules and fan tray field-replaceable

Three (3) independent cooling fans with system monitored fan-fail signals removable fan tray AC and DC power supply units

-Hot-swappable, 1+1 redundant, load sharing, AC input and DC input power supplies

-Mixed AC & DC supplies supported in the same Chassis

Image 2
Contents Benefits FeaturesApplications WAN/LAN Software Technical SpecificationsHardware Technical Specifications ATMOperating Characteristics Ambient operating temperature Power Requirements Power budget ACConfiguration used for above Recommended MAX

APX 1000 specifications

The Alcatel-Lucent APX 1000 is a cutting-edge access point designed to meet the demands of modern wireless networks. Tailored specifically for high-density environments, such as enterprises, schools, and public venues, the APX 1000 combines advanced features and technologies to deliver outstanding performance and user experience.

One of the main features of the APX 1000 is its support for Wi-Fi 6 (802.11ax), which offers significant improvements in speed, capacity, and efficiency compared to previous Wi-Fi standards. By utilizing technologies like Orthogonal Frequency Division Multiple Access (OFDMA) and Multi-User MIMO (MU-MIMO), the APX 1000 can handle multiple users simultaneously, making it ideal for environments with many connected devices.

The APX 1000 also incorporates intelligent radio management capabilities, which optimize the radio environment by automatically adjusting channel selection and transmission power. This ensures minimal interference and maximizes coverage throughout the deployment area. This feature is particularly beneficial in dense settings, where overlapping signals can lead to congestion and degraded performance.

Security is another key aspect of the Alcatel-Lucent APX 1000. It offers robust security protocols, including WPA3, which enhances protection against unauthorized access and ensures secure connections for users. The APX 1000 also integrates seamlessly with Alcatel-Lucent's network management solutions, allowing administrators to monitor and manage devices effortlessly.

The design of the APX 1000 is both sleek and functional, allowing for versatile deployment options. It can be mounted on walls or ceilings, blending seamlessly into various environments. The access point's dual-band capabilities provide flexibility, supporting both 2.4 GHz and 5 GHz bands, catering to different user needs and device types.

Another notable characteristic is the APX 1000's PoE (Power over Ethernet) capability, which simplifies installation by allowing the device to receive power and data over a single cable. This reduces the need for additional electrical wiring and enables faster deployment in challenging locations.

In conclusion, the Alcatel-Lucent APX 1000 is a robust and versatile access point that leverages advanced Wi-Fi 6 technology, intelligent radio management, and enhanced security features to deliver optimal performance in high-density environments. Its design, deployment flexibility, and ease of management make it a preferred choice for organizations looking to enhance their wireless connectivity.