Allied Telesis AT-2931SX manual Script Description, Teamname

Chapter 4: Installing BACS on a Linux System

AT-2931SX BASP Configuration Scripts for Red Hat Distributions

Both team-sampleand team-gecare configuration scripts that follow the same syntax. See Table 6.

Table 6. Configuration Scripts
Script	Description
TEAM_ID:	this number uniquely identifies a
	team
TEAM_TYPE:	0 = SLB, 1 = Generic Trunking/GEC/
	FEC, 2 = 802.3ad
TEAM_NAME:	ascii name of the team
TEAM_PAx_NAME:	ascii name of the physical interface
	x, where x can be 0 to 7
TEAM_PAx_ROLE:	role of the physical interface x 0 =
	Primary, 1 = Hot-standby.
	This field must be 0 for Generic
	Trunking/GEC/FEC team.
TEAM_VAx_NAME:	ascii name of the virtual interface x,
	where x can be 0 to 63
TEAM_VAx_VLAN:	802.1Q VLAN ID of the virtual
	interface x.
	For untagged virtual interface, that is,
	without VLAN enabled, set it to 0.
	The valid VLAN ID can be 0 to 4094.
TEAM_VAx_IP:	IP address of the virtual interface x.
	The format should be aa.bb.cc.dd.
TEAM_VAx_NETMASK:	Subnet mask of the virtual interface
	x. The format should mm.nn.oo.pp.

Note

Teaming scripts are intended for Red Hat and United Linux-based distributions ONLY. Use with other Linux distributions may cause an error.

58