Allied Telesis manual Installing the AT-2931SX Bacs Application, Installing with the GUI

Chapter 2: AT-2931SX Broadcom Advanced Control Suite (BACS) Applications

Installing the AT-2931SX BACS Application

Installing with the GUI

The AT-2931SX Broadcom Advanced Control Suite (BACS) software can be installed through the GUI or by using the silent install option. See the following procedures:

ˆ“Installing with the GUI” on page 18

ˆ“Using Silent Installation” on page 19

Note

Before installing the BACS software on a computer running Windows 2000 Advanced Server with Terminal Services, type change user /install from the DOS command prompt.

To install the AT-2931SX BACS application using the GUI (graphical user interface), perform the following procedure.

Note

Before you begin the installation, close all applications, windows, and dialog boxes

1.Double-click setup.exe.

2.Click Next in Broadcom Management Programs Setup.

3.Read the license agreement and click Yes.

4.In Select Components, click the component you want to install:

–Control Suite. Installs the Broadcom Advanced Server Control Suite.

–BASP. Installs the Broadcom Advanced Server Program.

–SNMP Service. Installs the Advanced Server SNMP subagent.

–CIM Provider. Installs the CIM Provider.

18