Allied Telesis AT-WCP200G manual FCC Radio Frequency Exposure Statement

Page 4

Regulatory Notes and Statements

FCC Radio

Frequency

Exposure

Statement

FCC

Interference

Statement

Export restrictions

This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65 and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices.

The radiated output power of this Wireless LAN device is far below the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation is minimized.

When nearby persons has to be kept to ensure RF exposure compliance, in order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than 20 cm.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

1.Reorient or relocate the receiving antenna.

2.Increase the distance between the equipment and the receiver.

3.Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

4.Consult the dealer or an experienced radio/TV technician for help.

This product or software contains encryption code that may not be exported or transferred from the US of Canada without an approved US Department of Commerce export license.

Safety Information

Your device contains a low power transmitter. When device is transmitted it sends out radio frequency (RF) signal.

4

Image 4
Contents User’s Guide Page Regulatory Information Disclaimers Wireless LAN Health Authorization For UseStatement FCC Radio Frequency Exposure Statement Interference Statement Export restrictionsProtection Requirements for Health and Safety Article 3.1a CE Mark WarningPage Table of Contents Page Preface How This Guide is Organized Document Conventions Where to Find Related Guides Contacting Allied Telesyn Page Allied Telesyn AT-WCP200G PCI Adapter IntroductionUnpacking and Setup Hardware Installation Checking the InstallationInstalling Software InstallationDriver For Windows 98/ME/2000/XP AT-WCP200G User’s Guide Select Anyway AT-WCP200G User’s Guide Wireless LAN Utility For Windows 98/ME/2000/XPAT-WCP200G User’s Guide Page AT-WCP200G User’s Guide Page Wireless Utility Setting Status Tab Configuration Tab Page Advanced Tab Page Profile Tab Network Tab Statistic Tab About Tab Technical Specifications GeneralOperating 0o~ 40o C, Storage -25o~ 70o C Regulatory Domains