Altinex CP7317RS manual Memory

Page 13

CONTROLLERS

4.10.1. MEMORY 1

I/O port/memory is A

Sub-Register address is from 00 to 255

Sub-Register definitions

00This location should be set to FFh i f memory initialization is required. During the power up sequence this location is checked for software revision. If FFh is encountered then all memories are reset to factory condition. User memory is not

affected during initialization. Normally you should not write into this location. You can read this location without affecting the CP7317RS.

01I/O definition for digital port 1. Define if pin is Input or Output. If bit is set to 1 then this pin is Input if bit is set to 0 then this pin is output.

02I/O definition for digital port 2. Define if pin is Input or Output. If bit is set to 1 then this pin is Input if bit is set to 0 then this pin is output.

03I/O definition for digital port 3. Define if pin is Input or Output. If bit is set to 1 then this pin is the input if the bit is set to 0 then this pin is the output.

04I/O definition for digital port 4. Define if pin is Input or Output. If the bit is set to 1 then this pin is the input if

the bit is set to 0 then this pin is output.

05 Set baud rate for RS-232 communication.

1300

2600

31200

42400

54800

69600

7Custom baud rate

06Custom baud rate setup. Sub- registers 6 and 7 are used to define custom baud rate. This is usually not required however if it is absolutely necessary to set up non-standard

 

baud rate (as could be in case of

 

MIDI) then contact factory for

 

additional instructions. Register 5

 

must be set to 07h for this custom

 

baud rate to operate.

07

Custom baud rate setup.

08Not available/ Do not read or write into this location.

09Not available/ Do not read or write into this location.

10Unit id number. Any number from 1 to 255. This id number is used during control of multiple CP7317RS units. If the id number is set to 1 then unit will respond to all commands. Id number is factory set to 1

11Not available / Do not read or write into this location.

12Not available / Do not read or write into this location.

13Not available / Do not read or write into this location.

14Not available / Do not read or write into this location.

15Not available / Do not read or write into this location.

16These 8 locations are used to store feedback codes for commands that are properly executed.

.

Factory default is “OK”. To disable

 

feedback set sub-register 16 to FFh.

.

 

23End of feedback code for OK

24These 8 locations are used to store feedback code for command that was not properly

.

executed. Factory setting is “ERR”.

 

To disable feedback set sub-register

 

16 to FFh.

.

 

31End of feedback code for ERR

32Power up status of relays on port 1. If bit is set to 0 then relay will be closed on power up. If bit is set to 1 then relay will be open on power up.

12

Image 13
Contents CP7317RS Introduction Table of ContentsPrecautions / Safety Warnings About CP7317RS RS-232 Controller Technical SpecificationsCP7317RS Description CP7317RS FeaturesRelay Contacts Digital I/O PortsSoftware & Custom Programming Internal Power SupplyAscii RS-232 Communication SETIp,b,n Programing CommandsExample SETI1, 6,1 this would set SETIp,b1b6b2b7b3b8b4b9Rstf SETI2,10101010 BAUDnSETPDp,b,n SETPRp,b,n SETPDp,b1b6b2b7b3b8b4b9SETPRp,b1b2b3b4b5b6b7b8 Control CommandsSETIDn SETDp,b,nSETRp,b,n SETDp, b1b6b2b7b3b8b4b9SETRp,b1b2b3b4b5b6b7b8 RsetRegister Definitions Binary Communication ProtocolMemory Memory Relay Port Registers 11 I/O Port RegistersAltinex Policy Limited WarrantyReturn Policy Contact Information

CP7317RS specifications

The Altinex CP7317RS is a cutting-edge solution designed for advanced audio-visual applications. This versatile controller is a part of Altinex's broad portfolio of professional audio-visual solutions, known for enhancing the user experience in environments like conference rooms, classrooms, and auditoriums. The CP7317RS controller stands out with its impressive array of innovative features, technologies, and characteristics.

One of the most notable features of the CP7317RS is its compact design, which allows for easy integration into various settings without taking up too much space. Despite its small footprint, the controller is packed with functionality, enabling users to manage multiple AV devices seamlessly. Its user-friendly interface simplifies operation, allowing both novices and seasoned professionals to navigate its capabilities with ease.

The CP7317RS supports a variety of input and output formats, ensuring compatibility with a wide range of audiovisual equipment. Users can connect multiple sources such as computers, projectors, and other multimedia devices, making it a versatile solution for multimedia presentations. The controller's ability to handle HDMI, VGA, and other input types makes it ideal for diverse applications, supporting both legacy and modern technologies.

Another key feature of the Altinex CP7317RS is its extensive control options. The device supports both RS-232 and TCP/IP communications, allowing for remote control and monitoring of AV systems. This remote access capability is particularly advantageous in large venues where equipment is located in different areas. Users can control various functions, such as switching inputs, adjusting volume levels, and managing video outputs, all from a central location.

Moreover, the CP7317RS is equipped with advanced programmable functionality. Users can customize settings according to specific needs, creating tailored control interfaces that streamline operations. This programmability enhances efficiency, ensuring that AV systems operate smoothly during presentations and events.

In addition to its operational features, the CP7317RS is built with reliability in mind. Altinex is known for its quality construction, and this controller is no exception. It has been designed to perform consistently in the demanding environments typical of professional AV setups.

Overall, the Altinex CP7317RS is an invaluable asset for any audio-visual setup. With its blend of compact form, extensive connectivity options, remote control capabilities, and customizable features, it stands as a premier choice for those seeking to enhance their AV experience. Whether in corporate, educational, or entertainment venues, the CP7317RS promises to deliver exceptional performance and user satisfaction.