SETPDp,b1b6b2b7b3b8b4b9, SETPRp,b,n | Altinex CP7317RS guide

CONTROLLERS

FIGURE 6: Input/Output Port Pin

Configuration

nThis letter designates the status of the pin as either high or low during “Power up” of the unit.

when n = 1 the pin is set as high when n = 0 the pin is set as low

Example: Set pin 1 of port 3 as low during POWER ON. [SETPD3,1,0]

[SETPDp,b1b6b2b7b3b8b4b9]

This command sets the “Power ON” status of all the pins on the particular port of the unit. This command determines whether port pins will be high or low during “Power up”. It is a programming command and should be issued only once during the configuration of the CP7317RS. Once issued, this command is stored in the non-volatile memory and is maintained during Power “ON/OFF”.

The factory preset of the CP7317RS is that all pins in all ports are set as output pins.

If it is required that the pin is set to low during power up. The pin status must be set as output. If a particular pin is set as the input then it can not be set low by this command during “Power up”.

pThis letter designates the port number. It is an ASCII character from 1 to 4 that matches the port number on the back of the CP7317RS. The acceptable values are 1, 2, 3 or 4. Any other value will cause an error as a feedback code.

bThis letter designates the pin numbe r. The position of this number corresponds to the number on the 9 pin connector on the back

of the CP7317RS. For example, b4 is the fourth pin on the connector. A valid range

for b is 1 or 0. Any other numbers will cause an error as a feedback code.

Example: Set pins 1 through 3 on port 2 as high; set pins 4, 6, 7 and 8 as low and pin 9 as high. [SETPD2,10101001]

[SETPRp,b,n]

This command sets the “Power ON” status of each relay on a particular port of the unit. This command determines whether a relay will be open or closed

during “Power up”. This command is a programming command and should be issued only once during the configuration of the CP7317RS. Once issued, this command is stored in the non- volatile memory and is maintained during “Power ON/OFF”.

The factory preset of the CP7317RS is that all relays are set to open.

pThis letter represents the port number. This is an ASCII character from 1 to 4 that matches the port number on the back of the CP7317RS. The acceptable values are 1, 2, 3 or 4. Any other value will cause an error as a feedback code.

bThis letter represents the relay number. This number corresponds to the number on the terminal block connector of the CP7317RS as shown on the diagram below. A valid range of numbers is from 1 to 8, inclusive. Any other numbers will cause an error as a feedback code.

FIGURE 7

CP7317RS specifications

The Altinex CP7317RS is a cutting-edge solution designed for advanced audio-visual applications. This versatile controller is a part of Altinex's broad portfolio of professional audio-visual solutions, known for enhancing the user experience in environments like conference rooms, classrooms, and auditoriums. The CP7317RS controller stands out with its impressive array of innovative features, technologies, and characteristics.

One of the most notable features of the CP7317RS is its compact design, which allows for easy integration into various settings without taking up too much space. Despite its small footprint, the controller is packed with functionality, enabling users to manage multiple AV devices seamlessly. Its user-friendly interface simplifies operation, allowing both novices and seasoned professionals to navigate its capabilities with ease.

The CP7317RS supports a variety of input and output formats, ensuring compatibility with a wide range of audiovisual equipment. Users can connect multiple sources such as computers, projectors, and other multimedia devices, making it a versatile solution for multimedia presentations. The controller's ability to handle HDMI, VGA, and other input types makes it ideal for diverse applications, supporting both legacy and modern technologies.

Another key feature of the Altinex CP7317RS is its extensive control options. The device supports both RS-232 and TCP/IP communications, allowing for remote control and monitoring of AV systems. This remote access capability is particularly advantageous in large venues where equipment is located in different areas. Users can control various functions, such as switching inputs, adjusting volume levels, and managing video outputs, all from a central location.

Moreover, the CP7317RS is equipped with advanced programmable functionality. Users can customize settings according to specific needs, creating tailored control interfaces that streamline operations. This programmability enhances efficiency, ensuring that AV systems operate smoothly during presentations and events.

In addition to its operational features, the CP7317RS is built with reliability in mind. Altinex is known for its quality construction, and this controller is no exception. It has been designed to perform consistently in the demanding environments typical of professional AV setups.

Overall, the Altinex CP7317RS is an invaluable asset for any audio-visual setup. With its blend of compact form, extensive connectivity options, remote control capabilities, and customizable features, it stands as a premier choice for those seeking to enhance their AV experience. Whether in corporate, educational, or entertainment venues, the CP7317RS promises to deliver exceptional performance and user satisfaction.