Altinex CP7317RS manual SETDp, b1b6b2b7b3b8b4b9, SETRp,b,n, SETRp,b1b2b3b4b5b6b7b8, Rset, READDp,b

Page 11

CONTROLLERS

Bit No.

Connector Pin No.

7

4

8

9

nData that defines the status of the pin n=1 or n=0.

[SETDp, b1b6b2b7b3b8b4b9]

SET all pins on the particular I/O port of the unit. This command defines if I/O port pins will be high or low. The pin must be set as output if it needs to be set low. If particular pin is set as input then it can not be set low by this command.

pPort number, this is an ASCII character from 1 to 4 that matches the port number on the back of the CP7317RS. The acceptable values are 1,2,3 or 4. Any other value will cause error as a feedback code.

bBit or pin number. The position of this number corresponds to the number on the 9 pin connector on the back of the

CP7317RS. For example b8 is a eighth pin on the connector. Valid range for b is 1 or 0. Any other numbers will be ignored and status of the port pin will not be changed.

[SETRp,b,n]

SET each relay on the particular port of the unit. This command defines if relay will be open or closed.

pPort number, this is an ASCII character from 1 to 4 that matches the port number on the back of the CP7317RS. The acceptable values are 1,2,3 or 4. Any other value will cause error as a feedback code.

bRelay number. This number corresponds to the number on terminal block connector on the back of the CP7317RS from left to right. Valid range of numbers is from 1 to 8, inclusive. Any other numbers will cause error as a feedback code. Use b=0 id you want to set all pins high or low on this port.

n=

Data that defines the status of the

 

relay.

n=1 relay is open or n=0 relay is closed.

[SETRp,b1b2b3b4b5b6b7b8]

SET all relays on the particular port of the unit. This command defines if port relays will be high or low.

pPort number, this is an ASCII character from 1 to 2 that matches the port number on the back of the CP7317RS. The acceptable values are 1or 2. Any other value will cause error as a feedback code.

bRelay number. The position of this number corresponds to the number on the terminal block connector on the back of the

CP7317RS. For example b5 is a fifth relay on the connector. Valid range for b is 1 or 0. Any other numbers will cause error as a feedback code.

[RSET]

Reset unit to the same condition as power on .

[READDp,b]

Read Digital status of a particular pin on the digital I/O port. The feedback is in the following format [1] if pin is high or [0] if pin is low.

pPort number, this is an ASCII character from 1 to 4 that matches the port number on the back of the CP7317RS. The acceptable values are 1,2,3 or 4. Any other value will cause error as a feedback code.

bBit number. This bit number corresponds to the pin number on the 9-pin connector on the back of the CP7317RS according to following table. Valid range of numbers is from 1 to 8, inclusive. Any other numbers will cause error as a feedback code. Use b=0 id you want to set all pins high or low on this port.

Bit No.

Connector pin No.

1

1

2

6

3

2

4

7

5

3

6

8

7

4

8

9

10

Image 11
Contents CP7317RS Introduction Table of ContentsPrecautions / Safety Warnings About CP7317RS RS-232 Controller Technical SpecificationsDigital I/O Ports CP7317RS FeaturesCP7317RS Description Relay ContactsAscii RS-232 Communication Internal Power SupplySoftware & Custom Programming SETIp,b1b6b2b7b3b8b4b9 Programing CommandsSETIp,b,n Example SETI1, 6,1 this would setSETPDp,b,n SETI2,10101010 BAUDnRstf SETPRp,b,n SETPDp,b1b6b2b7b3b8b4b9SETDp,b,n Control CommandsSETPRp,b1b2b3b4b5b6b7b8 SETIDnRset SETDp, b1b6b2b7b3b8b4b9SETRp,b,n SETRp,b1b2b3b4b5b6b7b8Register Definitions Binary Communication ProtocolMemory Memory Relay Port Registers 11 I/O Port RegistersContact Information Limited WarrantyAltinex Policy Return Policy

CP7317RS specifications

The Altinex CP7317RS is a cutting-edge solution designed for advanced audio-visual applications. This versatile controller is a part of Altinex's broad portfolio of professional audio-visual solutions, known for enhancing the user experience in environments like conference rooms, classrooms, and auditoriums. The CP7317RS controller stands out with its impressive array of innovative features, technologies, and characteristics.

One of the most notable features of the CP7317RS is its compact design, which allows for easy integration into various settings without taking up too much space. Despite its small footprint, the controller is packed with functionality, enabling users to manage multiple AV devices seamlessly. Its user-friendly interface simplifies operation, allowing both novices and seasoned professionals to navigate its capabilities with ease.

The CP7317RS supports a variety of input and output formats, ensuring compatibility with a wide range of audiovisual equipment. Users can connect multiple sources such as computers, projectors, and other multimedia devices, making it a versatile solution for multimedia presentations. The controller's ability to handle HDMI, VGA, and other input types makes it ideal for diverse applications, supporting both legacy and modern technologies.

Another key feature of the Altinex CP7317RS is its extensive control options. The device supports both RS-232 and TCP/IP communications, allowing for remote control and monitoring of AV systems. This remote access capability is particularly advantageous in large venues where equipment is located in different areas. Users can control various functions, such as switching inputs, adjusting volume levels, and managing video outputs, all from a central location.

Moreover, the CP7317RS is equipped with advanced programmable functionality. Users can customize settings according to specific needs, creating tailored control interfaces that streamline operations. This programmability enhances efficiency, ensuring that AV systems operate smoothly during presentations and events.

In addition to its operational features, the CP7317RS is built with reliability in mind. Altinex is known for its quality construction, and this controller is no exception. It has been designed to perform consistently in the demanding environments typical of professional AV setups.

Overall, the Altinex CP7317RS is an invaluable asset for any audio-visual setup. With its blend of compact form, extensive connectivity options, remote control capabilities, and customizable features, it stands as a premier choice for those seeking to enhance their AV experience. Whether in corporate, educational, or entertainment venues, the CP7317RS promises to deliver exceptional performance and user satisfaction.