SETI2,10101010 BAUDn, Rstf, SETPDp,b,n

CONTROLLERS

bThis letter defines the status of a pin, while its position in a string number corresponds to the pin number on the I/O Port of the

CP7317RS. For example b4 represents the status of Pin 4 on the I/O connector. The valid pins on I/O port are from 1 to 9 except 5. A valid range for the b is either 1 or 0. Any other number will cause an error as a feedback code.

When b is 1, the corresponding pin is set as input.

When b is 0, the corresponding pin is set as output.

Example: Set pins 1 through 4 of port 2 as inputs, and 6 through 9 as outputs

[SETI2,10101010]

[BAUDn]

This command sets the baud rate for the CP7317RS. This command is a programming command and should be issued only once during the configuration of the CP7317RS.

Once issued it is stored in the non-volatile memory and is maintained during “Power ON-OFF”.

The factory preset for the CP7317RS is n=4, which corresponds to the 2400 baud rate. When the [RSTF] command is issued the baud rate is set to 2400.

Do not set the baud rate to any other numbers except the ones specified below. The baud rate, n=7 is reserved for future use and is not active with the current version of this product.

nThe baud rate number. This number ranges from 1 to 7 and sets the baud rate for RS- 232 communication.

Baud rate

1300

2600

31200

42400

54800

69600

7Custom baud rate

[RSTF]

Reset the CP7317RS to the factory settings. Re-initialize non-volatile memory to the factory pre- sets. This command also resets the baud rate of the RS-232 communication port to 2400 baud.

This command also resets the unit ID to 1.

[SETPDp,b,n]

This command sets the “Power ON” status of each pin on the particular I/O port of the CP7317RS. This command determines whether port pins will be high or low during “Power up”. It is a programming command and should be issued only once during the configuration of the CP7317RS. Once issued, this command is stored in the non-volatile memory and is maintained during the “Power ON/OFF” sequence.

The factory preset of the CP7317RS is that all pins in the I/O ports are set as output pins.

If it is required that the pin is set to low during power up, the pin status must be set as output. If a particular pin is set as the input then it can not be set low by this command during “Power up”.

pThis letter designates the port number. It is an ASCII character from 1 to 4 that matches the port number on the back of the CP7317RS. The only acceptable values are 1, 2, 3 or 4. Do not use any other value for port number.

bBit number. This bit number corresponds to the pin number on the 9-pin connector on the back of the CP7317RS according to following table. A valid range of numbers is from 1 to 8, inclusive. Any other numbers will cause an error as a feedback code.

Bit No.	Connector pins No.
1	1
2	6
3	2
4	7
5	3
6	8
7	4
8	9

CP7317RS specifications

The Altinex CP7317RS is a cutting-edge solution designed for advanced audio-visual applications. This versatile controller is a part of Altinex's broad portfolio of professional audio-visual solutions, known for enhancing the user experience in environments like conference rooms, classrooms, and auditoriums. The CP7317RS controller stands out with its impressive array of innovative features, technologies, and characteristics.

One of the most notable features of the CP7317RS is its compact design, which allows for easy integration into various settings without taking up too much space. Despite its small footprint, the controller is packed with functionality, enabling users to manage multiple AV devices seamlessly. Its user-friendly interface simplifies operation, allowing both novices and seasoned professionals to navigate its capabilities with ease.

The CP7317RS supports a variety of input and output formats, ensuring compatibility with a wide range of audiovisual equipment. Users can connect multiple sources such as computers, projectors, and other multimedia devices, making it a versatile solution for multimedia presentations. The controller's ability to handle HDMI, VGA, and other input types makes it ideal for diverse applications, supporting both legacy and modern technologies.

Another key feature of the Altinex CP7317RS is its extensive control options. The device supports both RS-232 and TCP/IP communications, allowing for remote control and monitoring of AV systems. This remote access capability is particularly advantageous in large venues where equipment is located in different areas. Users can control various functions, such as switching inputs, adjusting volume levels, and managing video outputs, all from a central location.

Moreover, the CP7317RS is equipped with advanced programmable functionality. Users can customize settings according to specific needs, creating tailored control interfaces that streamline operations. This programmability enhances efficiency, ensuring that AV systems operate smoothly during presentations and events.

In addition to its operational features, the CP7317RS is built with reliability in mind. Altinex is known for its quality construction, and this controller is no exception. It has been designed to perform consistently in the demanding environments typical of professional AV setups.

Overall, the Altinex CP7317RS is an invaluable asset for any audio-visual setup. With its blend of compact form, extensive connectivity options, remote control capabilities, and customizable features, it stands as a premier choice for those seeking to enhance their AV experience. Whether in corporate, educational, or entertainment venues, the CP7317RS promises to deliver exceptional performance and user satisfaction.