Motorola PR400 manual Radio Calls, Selective Radio Inhibit, Receive a Selective Call

RADIO CALLS

SELECTIVE RADIO INHIBIT

Your radio is equipped with a security feature that can temporarily render the unit inoperative when an inhibit signal is sent from the base station.

This feature is commonly used to disable radios:

•In case of theft

•For system control reasons

When your radio has been rendered inoperative by the base station,all controls will be inoperative except for the On/Off button.

RECEIVE A SELECTIVE CALL

(CONVENTIONAL OPERATION ONLY)

When you receive a selective call:

•The LED indicator flashes yellow, if programmed by your dealer/programmer.

•You hear two high-pitched tones.

1To acknowledge the call, press and release the PTT button.

2Press and hold the PTT button to talk; release to listen.

RECEIVE A CALL ALERT™ PAGE

(CONVENTIONAL OPERATION ONLY)

When you receive a Call Alert page:

•The LED indicator flashes yellow, if programmed by your dealer/programmer.

•You hear four high-pitched tones.

To acknowledge the page, press and release the PTT button; to cancel the page, press any other key.

25

RADIO CALLS

English